Category: Diver Development

  • Why Sidemount Appeals to Me More Than Twinset

    Why Sidemount Appeals to Me More Than Twinset

    Technical Diving • Sidemount • Diver Development

    Why Sidemount Appeals to Me More Than Twinset

    I already own twin 12s. The problem is that somebody eventually has to pick the bloody things up.

    I already have a twinset.

    So my interest in sidemount is not based on never having considered the obvious alternative.

    Manifolded twins make complete sense for a lot of diving, and plenty of very good technical divers use them.

    But the more I think about the diving I actually want to do, the more sidemount seems to fit me better.

    Not because it is newer.

    Not because it looks more technical.

    And definitely not because I think it will magically make me a better diver.

    It simply seems to solve more of the problems that matter to me.

    The right configuration is not the most impressive one. It is the one that makes sense for the dive and the diver.

    The twinset problem starts on land

    My biggest issue with twinset is not what happens underwater.

    It is everything required to get the thing there.

    Have you ever picked up twin 12s?

    Now add your backplate, wing, regulators and whatever ballast your exposure protection requires.

    That is a substantial lump of equipment sitting on your back before the dive has even started.

    For UK diving, that matters.

    We have already established that some of our dive sites have an unhealthy relationship with car parks, rocks, long walks and inconvenient exits.

    I do not see much virtue in exhausting myself carrying one enormous rigid package to the water when there may be another way of achieving the same goal.

    Sidemount changes the logistics

    One of the big attractions of sidemount is being able to move the cylinders independently.

    Instead of carrying twin 12s as one giant unit, I can move cylinders separately and clip them on nearer the water where the site allows it.

    That immediately changes the physical cost of the dive day.

    Easier entry.

    Easier exit.

    Less weight sitting on my spine while walking around on land.

    Given how much I already think about conserving energy before a UK dive, that matters enormously to me.

    I want to spend my energy diving, not proving I can carry the dive site on my back.

    Travel makes the difference even bigger

    My diving is not exclusively UK based.

    I travel.

    And airlines tend to become strangely unreasonable when you suggest taking a manifolded set of twin 12-litre steel cylinders as hand luggage.

    Sidemount is much more attractive in that environment.

    I can travel with the harness, wing, regulators and cylinder rigging, then configure suitable hire cylinders at the destination.

    The cylinders do not have to belong to me for the configuration to work.

    Twinset is very different.

    If the destination does not have a correctly configured manifolded twinset available, I cannot simply turn two ordinary hire cylinders into the same setup with a few bits from my luggage.

    For somebody who expects to keep combining UK diving with trips abroad, sidemount feels far more portable.

    My first little taste came from a pony bottle

    Deep Diver was probably where sidemount stopped being an abstract idea for me.

    At 40 metres I was carrying an additional side-slung pony.

    It obviously was not a full sidemount configuration.

    But having a cylinder beside me gave me a small taste of what moving gas off my back could feel like.

    I liked it.

    I liked being aware of the additional gas.

    I liked the planning around it.

    And I liked having the cylinder somewhere I could see and interact with easily.

    That experience was one of the things that pushed me into looking at sidemount much more seriously.

    Independent gas appeals to my brain

    One of the strongest technical attractions for me is having two independent cylinder and regulator systems.

    That changes how I think about redundancy.

    Rather than one manifolded back-gas system, I have gas distributed across independent systems beside me.

    Of course, that also introduces new responsibilities.

    Gas has to be managed properly between cylinders.

    Regulators have to be used deliberately.

    Cylinder pressures have to remain part of the dive plan rather than becoming something I vaguely check whenever I remember.

    Weirdly, that is part of what attracts me.

    I like systems where the “what if?” has an answer before the dive begins.

    Freedom underwater matters too

    Sidemount also looks like it will suit the way I want to move underwater.

    The word I keep coming back to is freedom.

    I do not want to feel locked inside one large rigid package.

    With cylinders beside me, I can interact with them.

    I can reach the valves.

    I can change their position.

    I can trim the cylinders rather than simply accepting wherever a rigid twinset puts the mass.

    That flexibility appeals to me a lot.

    Then there are wrecks

    Wreck diving is one of the big reasons I am interested in technical progression.

    I have already enjoyed being inside wrecks such as the Thistlegorm.

    What interests me is sensible penetration and swim-throughs where there is actually something worth going in to see.

    I am not particularly interested in forcing myself through tiny restrictions purely so I can later tell somebody that I fitted.

    Sidemount gives me more options around wreck structure.

    The cylinders sit alongside me rather than forming one wide rigid block across my back.

    They can also be moved when the environment and training make that appropriate.

    That does not turn every hole in a wreck into an invitation.

    Training, gas, line work, team planning and exit strategy still matter.

    But the configuration gives me options.

    Depth is not really the goal

    This links back to something Deep Diver taught me.

    I am not particularly interested in going deeper simply because I can.

    Forty metres is just forty metres.

    If there is a wreck feature at 38 metres, a swim-through, something unusual to see or a proper training objective, then the depth may be justified.

    If the only objective is touching the number and coming back up, I am not especially interested.

    Technical training appeals to me much more because of what the planning can unlock.

    More options.

    More redundancy.

    Longer planned dives.

    Wreck penetration.

    Structured decompression where appropriate.

    Better answers to failures.

    Technical diving can sound backwards from the outside

    People sometimes hear “technical diving” and immediately translate it to:

    More dangerous diving.

    I understand why.

    The dives can involve greater complexity, different gases, overhead environments or decompression obligations.

    But one thing that appeals to me is how much attention technical training gives to planning failures before they happen.

    What if a regulator fails?

    What if gas disappears?

    What if the planned exit becomes unavailable?

    What gas do I need to solve the problem?

    What is the team doing?

    What is the backup?

    I love that kind of thinking.

    Not because complexity automatically creates safety.

    It does not.

    But deliberate redundancy and planning can create options when something changes.

    I know I am going to get worse before I get better

    I am not expecting to put on a sidemount wing and immediately look like I have been diving the configuration for ten years.

    Quite the opposite.

    I expect a few fairly substantial steps backwards.

    My current trim and buoyancy feel increasingly natural.

    Changing the entire buoyancy and cylinder configuration means learning parts of that again.

    Where does the gas sit?

    Where do the cylinders sit?

    How does the wing behave?

    How does my centre of gravity change?

    How does propulsion feel with cylinders alongside me?

    I know there will be dives where I look significantly less polished than I currently do.

    That is fine.

    I would rather temporarily look like a beginner again than pretend a new configuration requires no relearning.

    Fit the system first

    When I eventually start the sidemount course, the first thing I want is not a long list of impressive drills.

    I want the wing fitted correctly.

    Then I want the cylinders sitting correctly.

    Perfectly horizontal.

    Close to the body.

    Valves where they should be.

    Nothing hanging down like a pair of shopping bags.

    Once the platform is right, then I want to start learning the skills.

    That order matters to me.

    I do not want to spend a course compensating for a badly fitted rig and accidentally turn those compensations into habits.

    The current front runner

    At the moment, the XDEEP STEALTH 2.0 TEC is the system sitting at the top of my list.

    I have also looked at systems from Hollis, Apeks and others.

    The STEALTH keeps pulling me back because it appears to line up with the direction I want my diving to go.

    But this is exactly where I need to follow my own gear rule.

    Test everything and choose what disappears into the background for you.

    I do not want to buy a sidemount system purely because the specification sheet looks good or because I already like another XDEEP product.

    I want experience in the configuration before treating the buying decision as final.

    Sidemount first, then Tec 40?

    I would be happy for my sidemount and Tec 40 progression to overlap.

    But at the moment I am leaning towards doing sidemount first.

    The reason is task loading.

    If I am still consciously thinking about where my cylinders sit, how the wing behaves or how to manage the configuration, that is attention I cannot spend elsewhere.

    Tec 40 will introduce its own procedures and planning.

    I would rather have the basic sidemount platform feeling familiar before I start layering more complexity on top.

    Get the platform boring first. Then add complexity.

    This will not be my “technical-only” setup

    One thing I am already fairly confident about is that I do not see sidemount as something I would save for special technical dives.

    Once I am properly trained and comfortable, I can genuinely see myself using it for around 90% of my diving.

    Recreational dives too.

    If the configuration gives me easier entries, independent gas, clean trim, good travel options and freedom underwater, I do not see why I would leave it at home simply because the planned dive is inside recreational limits.

    The other 10% would probably be the simplest dives where a single cylinder on my XDEEP ZEN is the obvious answer.

    That gives me two configurations rather than forcing one setup onto everything.

    At first, though, I want to use it constantly

    When I first qualify in sidemount, I want to use it whenever reasonably possible.

    Not because I think it is automatically the best setup for every dive.

    Because I need repetition.

    I want gas switching to stop feeling novel.

    I want clipping and unclipping cylinders to stop requiring conscious thought.

    I want the valves to be exactly where my hands expect them.

    I want the trim to become normal.

    I want to stop thinking:

    “I am diving sidemount.”

    And simply think:

    “I am diving.”

    Then it becomes another tool

    Once that confidence exists, my attitude changes.

    Sidemount does not need to win.

    Single-tank backmount does not need to win.

    I just need to choose the tool that makes sense.

    Simple recreational dive where a single cylinder on the ZEN is easiest?

    Use the ZEN.

    Dive where independent cylinders, easier transport, wreck flexibility or technical planning make sidemount the better configuration?

    Use sidemount.

    That is ultimately where I want to end up.

    Final thought

    Sidemount appeals to me more than twinset because it seems to fit both my diving and the way I think.

    It reduces the part I dislike most about twins — carrying an enormous rigid package around on land.

    It works better with the fact that I travel.

    It gives me independent gas systems.

    It gives me more flexibility around wrecks and swim-throughs.

    And it looks like a configuration I could use for far more than technical dives.

    But none of that means I expect it to be easy.

    I fully expect to get worse before I get better.

    I expect to relearn trim.

    Relearn buoyancy.

    Learn new gas habits.

    Learn new equipment habits.

    And spend a lot of time making tiny adjustments until the configuration stops demanding my attention.

    That is the goal.

    Learn it until sidemount stops feeling like sidemount — then choose the right tool for the dive.

  • Quarries vs Sea Dives: What Each Teaches

    Quarries vs Sea Dives: What Each Teaches

    UK Diving • Dive Sites • Learning

    Quarries vs Sea Dives: What Each Teaches

    I do not see quarries as fake diving or the sea as automatically better. They give me different problems to solve.

    Quarries are where I can make things boring

    I actually like quarry diving.

    That does not mean I think a quarry is the same thing as the sea.

    Its biggest strength is often the opposite: it removes variables.

    Known entry points, no tide, generally predictable navigation and a familiar shore setup make it much easier to repeat a skill until it becomes boring.

    That is incredibly useful for training.

    A quarry is not valuable because it imitates the sea perfectly. It is valuable because it lets me practise without the sea changing the exam paper halfway through.

    Scuba gear prepared at an inland dive site
    Inland sites give me a controlled place to repeat skills, configuration and the basics.
    Martin and Matthew prepared for UK drysuit diving
    UK sea diving adds the environment itself to the workload: exposure protection, entries, exits and changing conditions.

    Inland sites expose the basics

    When the environment is relatively controlled, it becomes harder to blame the conditions for untidy fundamentals.

    Buoyancy, trim, shutdown practice, DSMB work, finning, weighting and general configuration can all be repeated with fewer distractions.

    That makes inland diving a very good workshop.

    The sea makes the whole dive matter

    Coastal diving adds a different layer.

    Weather, swell, current, entry and exit, boat movement, slippery rocks, visibility and changing conditions can all matter before I even get to the underwater part.

    St Abbs reinforced that for me. The dive itself can be lovely while the shore exit reminds you very quickly that the day does not end at the safety stop.

    Natural navigation feels different

    The sea has also made me pay more attention to natural navigation.

    At St Abbs I remember using the rock formation as a reference and thinking about the relationship between the coastline and direction rather than simply following a fixed quarry feature.

    That kind of navigation feels more connected to the environment.

    The sea teaches energy management

    One of the biggest differences for me is energy.

    A long carry, awkward entry, waves, a ladder or a shore exit can eat into the same physical and mental reserve I need underwater.

    That links directly to the human-factors side of diving: pre-dive faff and physical workload are not separate from the dive just because they happen above the water.

    I want both in my training

    If I only dived quarries, I would miss the environmental judgement and adaptability the sea demands.

    If I only dived the sea, I would lose one of the easiest places to repeat skills deliberately without every session being dictated by conditions.

    For where I am heading—Divemaster development, sidemount and eventually more technical diving—I want both.

    The quarry gives me repetition.

    The sea gives me variability.

    Both expose weaknesses, just in different ways.

    One lets me sharpen the tool. The other makes me use it.

  • Planning for Sharm 2027

    Planning for Sharm 2027

    Trip Planning • Red Sea • 2027

    Planning for Sharm 2027

    We already know we love diving there. The interesting bit now is working out how much training to mix into a three-week family trip.

    We are going back

    After diving with Elite in Egypt, the obvious question was not whether we wanted to return.

    It was how soon we could sensibly do it.

    The current plan is to be back in Sharm from 28 June to 21 July 2027, staying in an Airbnb arrangement recommended through Jenny and Wessam and diving again with the people we already know.

    That familiarity matters. A holiday is a lot easier when the diving centre is not another unknown quantity to solve on day one.

    This trip is not about collecting courses. It is about building a lot of good diving around a few carefully chosen goals.

    The family plan matters more than my course list

    This is a trip for me, Gemma and Matthew.

    I want us to have plenty of days where the only objective is to go diving together and enjoy being in the Red Sea.

    We are looking at roughly 10–14 days of diving depending on how the courses fit, rather than trying to cram training into every available morning.

    Gemma is interested in doing Deep while we are there, and Matthew will be diving with us as well.

    My own direction is getting more technical

    My interests are changing.

    I still love ordinary recreational diving, but I am increasingly curious about sidemount and technical training.

    Tec 40 is the obvious first step I keep coming back to, with Tec 45 as a possibility if the progression, time and experience all make sense.

    I am not treating Tec 45 as something I am entitled to bolt onto the holiday because it exists on a course list. If Tec 40 needs to stand on its own, that is fine.

    Sidemount could make the trip even more interesting

    I have also asked about sidemount training and whether a suitable wing could be rented rather than me immediately travelling with another mountain of equipment.

    Sidemount is appealing to me for a lot of reasons: independent gas, flexibility, easier equipment handling and where I think my longer-term diving may be heading.

    Doing the course somewhere warm and clear has obvious appeal, but I also want whatever I learn to transfer back to UK diving rather than becoming a holiday-only configuration.

    Three weeks gives us something valuable: breathing room

    The best part of having three weeks is that not every day has to be productive.

    We can have training days, family dive days, easier days and rest days without feeling that one weather change or tired morning has destroyed the whole plan.

    That is exactly how I want to approach it.

    I would rather finish the trip wishing I had squeezed in one extra dive than spend the last week knackered because I treated a holiday like a military exercise.

    What would make the trip a success

    For me, a successful Sharm 2027 would be pretty simple:

    • lots of enjoyable dives with Gemma and Matthew;
    • Gemma getting the Deep training she wants;
    • me making a sensible next step toward sidemount and/or Tec 40;
    • enough repetition that new skills start to feel normal;
    • coming home more experienced rather than merely more certified.

    I am excited by the courses, obviously.

    But the real attraction is three weeks of being around diving, doing it repeatedly, and sharing it with the people I most want beside me.

    The qualification is a bonus. The diving is the point.

  • Strength Training for Scuba Divers: Why It Matters

    Strength Training for Scuba Divers: Why It Matters

    Fitness • Real-World Diving • Diver Development

    Strength Training for Scuba Divers: Why It Matters

    I like being strong. Diving has shown me where that strength is genuinely useful — and where technique matters more.

    Scuba is wonderfully weightless once you are underwater

    One of the funny things about scuba is that the bit everybody photographs is often the easiest part physically.

    Once I am neutrally buoyant and settled underwater, I want the whole thing to look almost lazy.

    The hard work tends to happen before and after that: cylinders, bags, fins, drysuit, weights, ladders, boats, uneven ground and getting a fully kitted body from one place to another without wasting half the day’s energy.

    Strength is most useful when it makes the logistics of diving less demanding, not when it makes me fight the water.

    Being a big strong bloke has obvious advantages

    I have always enjoyed strength training and I am naturally a big, heavyset bloke.

    That is handy when something genuinely needs lifting or carrying.

    A 12-litre steel cylinder does not become light because we call diving a recreational activity. Add a BCD or wing, regulators, weights and exposure protection and there is plenty of kit to move around before anybody gets wet.

    Being stronger gives me more reserve for those jobs.

    But brute force is a poor diving technique

    The important bit is not confusing strength with skill.

    Underwater, I do not want to muscle anything into place. I want trim, buoyancy and good positioning to do the work.

    The same applies to rescue. Physical strength is useful, but good technique, leverage, positioning and calm problem-solving should come first.

    I would much rather use strength as spare capacity than as the only reason a technique works.

    Strength should be a reserve, not a substitute for technique.

    Where I notice strength most

    For me, the practical benefits show up in fairly ordinary places:

    • moving cylinders and assembled kit;
    • getting equipment on and off safely;
    • shore entries and exits;
    • boat ladders and awkward steps;
    • carrying kit across a quarry or car park;
    • helping a buddy with equipment;
    • having more physical reserve when a day becomes longer than planned.

    None of those are glamorous, but they all affect how much energy I have left for the actual dive.

    Scuba diving equipment laid out ready for a dive
    A lot of the physical work in scuba happens before and after the weightless bit underwater.

    Fitness is bigger than strength

    I also do not want to pretend a big bench press solves everything.

    Divemaster preparation is making that particularly obvious. Surface swimming, finning efficiency, cardiovascular endurance, mobility and simply being comfortable working for longer all matter.

    My challenge is not to become stronger for the sake of chasing numbers. It is to turn the strength I already enjoy building into useful diving capacity while improving the areas that strength cannot cover.

    The goal is to arrive at the water with energy left

    A good strength programme for me is not really about looking like a strong diver.

    It is about making the physical chores around diving feel routine.

    If moving cylinders, climbing a ladder or helping with somebody else’s kit costs less of my available energy, I have more attention and reserve for the dive itself.

    I like lifting heavy things in the gym. That is part of who I am.

    But the diving payoff is much simpler: I want the kit to feel manageable, the entry to feel controlled and the water to be where I become relaxed.

    Strong enough for the kit. Skilled enough not to need strength underwater.

  • Fish ID: Why Aquarium Keeping Helps Underwater

    Fish ID: Why Aquarium Keeping Helps Underwater

    Marine Life • Fish ID • Aquarium Keeping

    Fish ID: Why Aquarium Keeping Helps Underwater

    My aquarium hobby gave me a head start — not because I know every species, but because I had already learned how to look.

    Fish ID was one of the easier AOW dives for me

    When Fish ID came up as part of my Advanced Open Water course, I expected it to be enjoyable.

    What surprised me was how familiar the thinking felt.

    Years of keeping marine aquariums had already pushed me into fish taxonomy, family groups, body shapes, colour patterns and behaviour.

    I certainly cannot identify every fish I see, but the process of working out what I am looking at was already something my brain enjoyed doing.

    Aquarium keeping did not give me every answer. It taught me what details to look for.

    I tend to look for families before species

    Trying to identify every animal down to species level immediately is a brilliant way to overwhelm yourself.

    I find it easier to start broad.

    What shape is it? How does it swim? Where is it feeding? Is it hovering above the reef, sitting on sand, tucked into rockwork or defending a patch?

    Once I have the likely family or type in mind, the smaller markings become much more useful.

    Behaviour is part of identification

    One thing aquarium keeping teaches very quickly is that behaviour matters.

    Fish learn routines and recognise the people around their tank. They also have very obvious individual personalities.

    That makes me pay attention underwater to what an animal is doing rather than only its colour.

    Is it grazing? Picking at coral? Hovering over a burrow? Guarding eggs? Cleaning another fish? Disappearing into the same hole every time a diver approaches?

    Those observations make the dive more interesting even when I never manage to put an exact species name on the animal.

    The ugly little details help too

    Keeping reefs has also taught me about algae, pests, the biological cycle and water chemistry.

    That means I am often just as interested in what is growing on the rock as what is swimming over it.

    A patch of algae, a tiny invertebrate, a burrow, a damaged coral surface or a cluster of something unfamiliar can become the thing I remember from the dive.

    Taxonomy became a hobby almost by accident

    I did not sit down one day and decide I needed to learn marine taxonomy.

    It happened because one question leads to another.

    What is that fish? What family is it in? What does it eat? Is it reef safe? What does it look like as a juvenile? Why is it behaving like that?

    Do that for long enough and you end up with a surprisingly useful framework when somebody hands you a Fish ID slate underwater.

    The goal is curiosity, not showing off

    I do not want Fish ID to turn into another badge-collecting exercise where the person who can name the most Latin species wins.

    For me the useful outcome is that I pay closer attention.

    If I identify the fish later from a photograph or book, brilliant. If I only come away knowing that I watched something behave in an interesting way, that is still a better dive than swimming past it without noticing.

    The aquarium hobby gave me vocabulary and a habit of observation.

    Diving gives me the chance to use both where the animals actually live.

    The more I know what I am looking at, the less of the reef becomes background scenery.

  • What I’m Tracking in My Dive Log — and Why

    What I’m Tracking in My Dive Log — and Why

    Dive Journal • Reflection • ZeusTek Diving

    What I’m Tracking in My Dive Log — and Why

    I want my log to tell me more than where I went and how deep I got.

    I still start with paper

    I have built a fairly serious digital home for my diving, but immediately after a dive I still like writing things down on paper.

    There is a reason for that.

    The act of writing forces me to slow down and replay the dive in my head. What did I see? What felt good? What felt untidy? Was there a moment where I was overloaded? Did I use more gas than expected? Was the weighting right? Did the entry cost more energy than it should have?

    If I only tap a few numbers into an app, it is easy to record the dive without really processing it.

    Writing it by hand gives me one more pass through the experience while it is still fresh.

    The paper log is not just storage. For me, writing is part of the debrief.

    The app is becoming the main repository

    The other half of the system is the ZeusTek Diving WPA web app I have been building.

    That is fast becoming the main repository for everything diving.

    I can keep the individual dive records, equipment, cylinders, training, insights and planning in one place and then look across multiple dives instead of treating every log entry as an isolated memory.

    That is where digital logging starts to become genuinely useful to me.

    Depth and time are the easy bit

    Maximum depth and dive time are obvious things to record, and of course they matter.

    But by themselves they tell me very little about whether the dive was good.

    I am interested in the context around those numbers: environment, activity, conditions, entry type, what I was wearing, what cylinder I used, weighting, what the dive was trying to achieve and why it ended.

    Two forty-minute dives can be completely different workloads.

    Gas becomes useful when it becomes a trend

    I track gas because I want to understand how my breathing changes rather than beat myself up over one number.

    A single SAC or RMV figure can be affected by depth, temperature, current, workload, stress, kit, fitness and what I was actually doing.

    Once enough dives are in the system, the interesting question becomes whether there is a trend and what was different on the outliers.

    That is much more useful than declaring one dive “good” and another “bad” because of a number.

    I want to log the human factors as well

    The parts I increasingly care about are often the least glamorous ones.

    • Was I tired before the dive?
    • Was there a lot of pre-dive faff?
    • Did I feel rushed?
    • Was I cold?
    • Did something keep stealing my attention?
    • Was there a decision I would make differently next time?

    Those things are harder to reduce to a neat chart, but they are often where the most useful learning sits.

    If a log only records the dive profile, it can miss the reasons the dive felt the way it did.

    The point is not to collect numbers

    I like data. That probably surprises nobody who knows me.

    But I do not want to turn diving into a spreadsheet competition.

    The purpose of collecting data is to help me see patterns, make better decisions and remember the actual experience.

    If a metric does not help me learn, plan or reflect, it can very quickly become noise.

    Paper first, analysis later

    So my current workflow is deliberately a mixture of old and new.

    Paper gives me the immediate reflection. The web app gives me the long-term memory and analysis.

    I expect the digital side to keep growing because I am building it around the way I actually dive, but I do not see myself throwing the notebook away.

    For me, a useful dive log should answer more than “where did I go?”

    It should help answer “what did I learn, what changed, and what should I do differently next time?”

    A dive becomes experience when I actually process it.

  • Preparing for Divemaster: What I Need to Sharpen

    Preparing for Divemaster: What I Need to Sharpen

    Training Notes • Divemaster • Diver Development

    Preparing for Divemaster: What I Need to Sharpen

    I’m not doing Divemaster for the title. I’m doing it to become smoother, calmer, more capable — and a better buddy.

    Starting Divemaster feels different from the other courses I have done.

    It is longer.

    It asks for more consistency.

    It is less about learning one new skill and more about refining everything around the way I dive.

    That is exactly why I want to do it.

    I am not chasing a professional title for the sake of having one.

    About 90% of the reason I want to do Divemaster is simple:

    I want to become the best dive buddy I can be.

    The other 10% is the small voice saying:

    “Well… if the professional route was affordable enough, maybe I could eventually do a bit at weekends and let diving help pay for diving.”

    I am not building a whole new career plan around that idea.

    But I am not pretending it has never crossed my mind either.

    Demo-quality skills are probably what excites me most

    The part of Divemaster I am most looking forward to is developing demo-quality skills.

    I like the idea of taking something I can already do and slowing it right down until every part of the skill is deliberate and clear.

    For me, the logic is:

    Perfectly slow first. Smooth next. Fast comes later.

    If I can demonstrate a skill slowly and cleanly, then I should understand the movement well enough to do it smoothly.

    And smooth is fast.

    That is the kind of refinement I want.

    Not rushing.

    Not showing off.

    Just understanding the skill so well that I can make it obvious to somebody else.

    I want better underwater task management

    Another reason Divemaster appeals to me is task management.

    I want to be better at doing several things at once without letting any of them become messy.

    Watching students.

    Monitoring depth.

    Checking the group.

    Thinking about positioning.

    Staying aware of the instructor.

    Keeping my own buoyancy and trim boringly stable.

    Noticing when somebody looks uncomfortable before they become a problem.

    That is exactly the kind of workload I want to get better at handling.

    It links directly to the human-factors side of diving that interests me so much.

    The goal is not to become busy.

    The goal is to become capable while busy.

    Surface swimming is probably my weakest confidence area

    Oddly, one of the areas I feel least confident about is surface swimming.

    I can swim.

    That is not the problem.

    What is strange is that I am less comfortable swimming in deep water at the surface than I am scuba diving in the deep blue below it.

    Underwater, I have equipment.

    Buoyancy.

    Breathing gas.

    Gauges.

    A plan.

    Something specific to do.

    On the surface, I feel more exposed and less structured.

    So improving my confidence in deep-water surface swimming is one of the things I actually want Divemaster training to force me to work on.

    The 800-metre snorkel is the one I am least excited about

    Of the water-skill assessments, the 800-metre snorkel is probably the one I am least enthusiastic about.

    Not because 800 metres sounds impossible.

    It is the sensation of breathing through a snorkel that I dislike.

    I find the restriction irritating.

    I am much happier breathing from a regulator underwater than breathing through a tube at the surface, which sounds slightly ridiculous when written down.

    But that is the reality.

    The 100-metre tired-diver tow and rescue work feel much more comfortable to me.

    Those are purposeful tasks.

    There is a clear objective.

    Rescue training has already given me a lot of confidence in that area.

    So the snorkel is less about raw fitness and more about building comfort with something I currently dislike.

    Solo rescue is something I want to sharpen

    Rescue Diver changed the way I think about helping somebody.

    One of the strongest moments for me was rescuing Gemma after a morning of rescue swimming.

    I was tired.

    It was emotional because it was my wife.

    But I got her to safety.

    That showed me I could do more than I thought.

    Divemaster gives me another opportunity to refine those rescue skills until the response is calmer, more efficient and less dependent on brute force.

    I am physically strong.

    That is useful.

    But strength should be a reserve, not the first technique.

    The goal is not to overpower the problem. It is to solve it cleanly.

    Leading dives is another big one

    I have already had small opportunities to lead parts of dives.

    At St Abbs, leading with Matthew behind me was something I was genuinely proud of.

    I had a small dive mirror, so I could keep an eye on him while still looking forwards.

    Navigation was straightforward enough because I had been paying attention on the way out.

    Rock formation on the left going out.

    Rock formation on the right coming back.

    West takes us towards land.

    “Natural navigation, my son.”

    Divemaster should give me more opportunities to develop that properly.

    Leading is not just knowing where to go.

    It is setting a pace.

    Watching the team.

    Making decisions early.

    And looking calm enough that other people feel calm too.

    Being a calm big bloke might actually be useful

    Physically, I am fairly imposing.

    That can be useful for carrying kit, rescue work and surface support.

    But I am hoping the more useful thing is the contrast.

    If somebody sees a big bloke who is completely calm, relaxed and soft in the water, perhaps that helps them relax too.

    I do not want to look like I am fighting the environment.

    I want to look unhurried.

    Stable.

    Approachable.

    Like the person who has time to help because they are not busy fighting their own equipment.

    The three strengths I think I bring in

    If I had to identify the three biggest strengths I already bring into Divemaster, they would probably be:

    Technical understanding

    I like understanding why things work.

    I am much happier when I understand the system rather than simply memorising a procedure.

    That applies to gas planning, buoyancy, equipment configuration, human factors and pretty much anything else I can disappear down a research rabbit hole about.

    Physical strength

    I am strong.

    That is useful when moving cylinders, assisting someone or dealing with the more physical side of UK diving.

    But I want Divemaster to help make sure I use technique before strength whenever possible.

    Teaching experience

    I also come into Divemaster with a formal teaching qualification and years of experience in higher education and university teaching.

    That does not make me a dive instructor.

    I do not want to pretend it does.

    But I am already comfortable breaking skills down, explaining ideas in different ways and recognising that repeating the same explanation louder is not the same as teaching.

    I will help pretty much anybody

    I am happy helping nervous divers.

    Experienced divers.

    Bigger divers.

    Smaller divers.

    Neurodivergent divers.

    People struggling with one skill.

    People who simply need another few minutes.

    Pretty much anybody.

    The only area where that becomes more complicated is behaviour that targets other people.

    Racism.

    Homophobia.

    Bullying.

    If someone needs help and it is my responsibility to help them, I will still do that professionally.

    But being calm and welcoming does not mean having no boundaries.

    If behaviour is making the environment worse for other people, I would expect to challenge it appropriately.

    This course is different for another reason

    Divemaster is also the first longer diving course I am doing without Gemma there in the same way to support my ASD needs.

    That makes it significant for me beyond the actual diving.

    Gemma knows me extremely well.

    She often notices when I am overloaded before I necessarily say anything.

    This time, I will be managing that myself.

    The training.

    The social side.

    The physical demands.

    The long days.

    The new expectations.

    And the inevitable point where my brain decides it has received quite enough input for one day.

    Simply seeing what I can complete independently will mean a lot to me.

    Most people probably will not notice I am autistic

    I am pretty good at masking my ASD.

    Most people probably would not immediately identify me as neurodivergent.

    Academically and technically, absorbing information is rarely the problem.

    I tend to soak up information and process it very quickly.

    The more relevant issue is the accumulated social and sensory load over a long course.

    Masking works well for me.

    The downside is that it costs energy.

    Something can look effortless from the outside while still being mentally tiring.

    Underwater gives me a break from masking

    Diving gives me an odd advantage here.

    Once we are underwater, a lot of the normal social performance disappears.

    Communication becomes structured.

    Signals.

    Positioning.

    Eye contact.

    Equipment.

    The dive plan.

    I do not have to maintain the same level of masking for eight continuous hours.

    The underwater sections can actually give my brain a different kind of space.

    That is probably one of the reasons diving works so well for me in the first place.

    I can make almost anywhere quiet

    Another useful tool is noise cancellation.

    If I need ten minutes where the world disappears, headphones can turn a surprisingly ordinary space into somewhere quiet.

    That means I can reset without needing some elaborate arrangement.

    Shut the world out.

    Process.

    Come back.

    Part of doing Divemaster without Gemma will be recognising when I need that reset myself rather than relying on somebody else to spot it for me.

    I would rather manage my ASD myself

    I do not currently feel the need to make my ASD the first item on the course briefing.

    I know what normally works for me.

    I am used to managing social situations.

    I process the technical material quickly.

    So I would rather manage it myself unless something genuinely becomes difficult.

    If something did become unmanageable, though, I would raise it.

    That is not failure.

    It is simply giving the instructor useful information before a manageable problem becomes an unnecessary one.

    Independence does not mean refusing to speak up when something stops working.

    I do not need to be the best person in the room

    I care a lot about being the best I can be at something.

    That does not mean I need to be the best person there.

    Diving makes that fairly obvious.

    One person may be brilliant at navigation.

    Another at rescue work.

    Another at teaching.

    Another at trim.

    Another at reading a nervous diver.

    There is no one person who is best at everything.

    What matters to me is knowing I have pushed my own skills as far as I reasonably can.

    Identified the weak bits.

    Worked on them.

    And learned from the people who are better than me at something.

    What would success actually look like?

    Success will not just be a score.

    Or a card.

    Or somebody saying I completed the course.

    I want to look back and see that my skills became smoother.

    That my surface confidence improved.

    That I can manage more tasks without becoming rushed.

    That my rescue response became calmer.

    That I can lead a dive without spending the whole time wondering whether I look like I am leading a dive.

    And that I became more useful to the people around me.

    And if the instructors want me to continue…

    If, by the end of it, somebody says:

    “We hope he changes his mind about not continuing down the professional route because he would make a great instructor.”

    That would obviously mean a lot.

    But I would also quite happily settle for:

    You passed.

    Anything beyond that is a bonus.

    Final thought

    I am not starting Divemaster because I think I have finished learning recreational diving.

    I am starting it because I know I have not.

    There are skills I want smoother.

    Weaknesses I want exposed.

    Surface confidence I want to build.

    Rescue skills I want sharper.

    Leadership I want to practise.

    And a whole new level of task management I want to experience.

    If it also teaches me that I am capable of completing a long training programme without Gemma beside me managing the bits of my ASD that normally sit quietly in the background, that may be one of the most important outcomes of all.

    I do not need to be the best Divemaster.

    I just want to find out how good a Divemaster I can become.

    Perfectly slow. Smooth. Calm. Useful. Then see where it takes me.

  • My Current Dive Kit Setup: What I Carry and Why

    My Current Dive Kit Setup: What I Carry and Why

    Gear • Dive Kit • Diver Development

    My Current Dive Kit Setup: What I Carry and Why

    My equipment has slowly changed from “carry everything” to “everything has a reason and a home.”

    My current dive setup looks very different from the gear configuration I started with.

    Early on, I carried almost anything I thought might possibly be useful.

    Slate.

    Compass.

    Knife.

    Lights.

    Beacon.

    Multiple spools.

    Multiple DSMBs.

    Huge console.

    If I owned it, there was a reasonable chance it was hanging off me somewhere.

    These days I think about kit differently.

    If I need it, it should have a reason for being there and a predictable place to live.

    The foundation: XDEEP ZEN backplate and wing

    My normal backmount setup is built around an XDEEP ZEN wing with the ZEN NX aluminium backplate.

    I chose aluminium because my diving is split between UK diving and trips that involve air travel.

    It gives me the rigid platform I want without making airline luggage even more entertaining than it already is.

    The biggest benefit is not that it looks technical.

    It is that underwater I barely notice it.

    Once the harness is adjusted properly and the weight comes off my back in the water, the system almost disappears.

    That is exactly what I want from equipment.

    Exposure protection depends entirely on the dive

    I do not have one exposure setup that I try to force onto every environment.

    For warmer diving I still enjoy being in a wetsuit.

    In the Red Sea, I actually like feeling the water against my skin.

    Depending on conditions, I have a 5 mm wetsuit, a 4 mm shortie and lighter thermal options.

    For colder UK diving I use a drysuit.

    I currently have a neoprene drysuit, although a custom trilaminate suit is high on my future purchase list because I want more mobility and less of the Maggie-Simpson-in-a-snowsuit experience.

    I also have my 7 mm semi-dry, which still has a place.

    The important thing for me is choosing the exposure protection that fits the actual conditions rather than automatically reaching for the biggest or warmest option.

    Regulators: several options, one job

    Over time I have ended up with a fairly substantial regulator collection.

    My first stages include Scubapro MK25, MK17 EVO and additional MK25 EVO units.

    Second stages include G260s, an A700, R380s, R190 and R105.

    I do not carry all of them on every dive, obviously.

    The advantage of having multiple regulator sets is being able to configure cylinders for different kinds of diving without constantly stripping everything apart.

    As I move further towards sidemount and technical diving, that flexibility becomes increasingly useful.

    Cylinders: this got out of hand quite quickly

    I appear to have accidentally collected cylinders.

    At the moment the collection includes multiple 12-litre steels, a 2 × 12-litre twinset, 10-litre stumpies, 7-litre cylinders, 5-litre cylinders, a 3-litre and a 2-litre.

    There are also pony mounts and sidemount or cross-body options.

    That sounds excessive until you start changing configurations.

    A cylinder that makes sense as a normal back-gas cylinder is not necessarily the cylinder you want as a pony, stage or suit-inflation bottle.

    The collection gives me options.

    It also gives Gemma plenty of evidence whenever she wants to argue that my definition of “essential dive equipment” has become dangerously flexible.

    Computers: information without becoming obsessed with screens

    My current dedicated dive computer is an Aqualung i330R.

    I also use an Apple Watch Ultra, with the Ultra 3 becoming part of the wider setup.

    Longer term, I am looking at moving towards a more technical-capable dedicated computer with air integration.

    The computer matters enormously, but I do not want to spend the whole dive staring at it.

    Depth.

    Time.

    Gas.

    NDL.

    Deco information when that eventually becomes relevant.

    I want those checks to become routine enough that I can process the information quickly and then get back to actually diving.

    Lights depend on whether darkness is part of the problem

    My main lights currently include an Orca D610 and Orca ZD710, along with several backup lights.

    I also carry small blue and red Orca beacons when appropriate.

    My redundancy changes with the dive.

    On a night dive, I take a primary and two strong backups.

    That means if the primary dies, I still move onto a proper light while retaining another backup.

    On a normal daytime dive where a torch is only useful for looking into cracks for lobsters, I may take only one.

    Redundancy should match the consequence of losing the item, not the size of the equipment cupboard at home.

    My right pocket: things I expect to use

    My right pocket is basically the utility pocket.

    It contains the things I reasonably expect to reach for during the dive.

    • Wetnotes containing the dive plan or tables
    • Slate where required
    • Routine DSMB
    • Routine spool or reel
    • Second backup torch where appropriate

    My first backup torch normally sits clipped to the right shoulder D-ring and is held neatly against the harness with a ranger band.

    If I am doing a dive with lots of recording — a survey or conservation activity, for example — I may use a wrist slate instead.

    My left pocket: safety and emergency kit

    The left pocket is more about things I hope I do not need.

    • Spare mask
    • Safety spool
    • Yellow emergency SMB or lift bag where appropriate
    • Spare double-ender
    • CPR mask
    • Shears or cutting tool
    • Small multi-tool where appropriate
    • Waterproof personal ID card

    I use a waterproof ID card containing a QR code.

    It is not something I particularly enjoy thinking about, but if I am ever in a situation where I cannot identify myself, I find some comfort in knowing that there is still information available to help connect me back to my family.

    DSMBs and spools: I may own slightly too many

    My DSMB and spool collection has become fairly healthy.

    I have multiple DSMBs, finger spools ranging from roughly 10 metres to 50 metres, and larger reels extending out towards 150 metres.

    I also have surface buoys and flags.

    But owning ten spools does not mean ten spools need to come on the dive.

    Normally there is a routine DSMB and deployment spool, plus an emergency or safety option where the dive justifies it.

    Everything else can remain in the bag until there is an actual reason to carry it.

    Cutting tools should be reachable

    I have never understood the point of carrying an emergency tool somewhere I cannot actually reach in an emergency.

    A cutting device should be secure but accessible.

    Shears and compact cutting tools make more sense to me than carrying something enormous simply because it looks impressive.

    As with the rest of my setup, the important question is:

    Can I reach it instinctively when I am stressed?

    The £20 dive mirror

    One of the cheapest pieces of equipment I have added has turned out to be surprisingly useful.

    A small dive mirror.

    I originally bought it before leading part of a St Abbs dive with Matthew behind me.

    It meant I could glance into the mirror and check that he was still where I expected without constantly turning around.

    It is also useful for doing my own bubble checks.

    Twenty quid.

    Tiny.

    Hardly glamorous.

    Very useful.

    My fins and boots are deliberately boring

    My main fins are black RK3s.

    I also use different boots depending on the site and exposure setup, including Cressi rock boots and other dive boots.

    That is one reason I am leaning towards socks rather than permanently attached boots when I eventually buy my trilaminate drysuit.

    I want the ability to choose the boot for the environment rather than have the suit make that decision for me.

    Hoods and gloves: UK diving’s glamour department

    I have accumulated different hood and glove thicknesses — roughly 3 mm, 5 mm and heavier cold-water options.

    Again, I would rather choose based on conditions than automatically wear the thickest thing I own.

    My hands can be beautifully warm in a drysuit while my face feels painfully cold.

    Nobody said UK diving was supposed to make complete sense.

    Nitrox analyser

    I carry my own NCR Nitrox analyser.

    If I am going to breathe a gas mixture, I want to know what is actually in the cylinder rather than rely entirely on somebody else’s label.

    That becomes even more important as I move further towards technical training and multiple-gas configurations.

    First-aid and emergency equipment

    My surface emergency kit has grown alongside my Rescue training.

    I have a substantial EFR kit that includes items such as splints and general first-aid equipment.

    An oxygen kit is another area I want to develop further.

    This equipment obviously does not come underwater with me.

    But it is still part of what I consider a complete dive setup.

    The dive does not begin at the descent and it does not end at the safety stop.

    I am still changing the setup

    This is not a finished configuration.

    I do not think it ever will be.

    The next big changes are likely to come from sidemount, technical training and a trilaminate drysuit.

    That will change where cylinders live.

    It may change buoyancy strategy.

    It will change gas planning.

    Some equipment will move.

    Some will disappear.

    Some new items will undoubtedly arrive in suspiciously large cardboard boxes.

    The important part is that the changes should solve problems rather than simply create a more impressive-looking equipment pile.

    My rule for deciding what comes on the dive

    I increasingly put equipment into three groups.

    Needed for life support or safety

    If losing it threatens the ability to safely complete the dive, I think seriously about redundancy.

    Needed to complete the planned dive

    This depends on the mission.

    Night diving needs lights.

    Surveys need recording equipment.

    A lobster dive may need a torch but not three of them.

    Nice to have

    This is where I am much more ruthless now.

    If I cannot explain what the item is doing for me on this particular dive, perhaps it can enjoy a relaxing afternoon in the dive bag.

    One is none and two is one — sometimes

    I like the basic redundancy principle of “one is none and two is one.”

    But I do not apply it blindly.

    Losing a primary light during a night dive is very different from losing the torch I was using to look underneath a rock at midday.

    Redundancy should be related to consequence.

    And carrying a backup is not enough.

    I need to know where it is.

    I need to be able to reach it.

    I need to be able to deploy it without dropping something else.

    That is why bolt snaps and bungee inside pockets matter.

    A shiny backup reel is significantly less useful when it is slowly disappearing into the abyss.

    Gear should reduce task loading

    This is probably the principle connecting the entire setup.

    I do not want equipment constantly demanding my attention.

    The harness should fit.

    The regulator should be where I expect it.

    The backup torch should be reachable.

    The DSMB should be in the same pocket.

    Nothing should be dangling around underneath me.

    If something fails, I should already know what comes next.

    The more of that becomes automatic, the more attention I have available for the environment, my buddy and the actual reason I got into the water.

    Final thought

    My current kit setup is not the correct scuba configuration.

    It is simply the configuration that currently works for me.

    Gemma’s setup is slightly different.

    Matthew’s will be different again.

    And mine will almost certainly change as I move further towards sidemount and technical diving.

    What matters more than any particular brand or piece of equipment is that I understand why it is there.

    It should fit.

    It should have a home.

    It should solve a problem.

    And ideally, once I am underwater, I should barely have to think about it.

    Carry what the dive needs. Know where it lives. Let the kit disappear.

  • The Pre-Dive Faff Factor: How Small Hassles Steal Energy Before the Dive

    The Pre-Dive Faff Factor: How Small Hassles Steal Energy Before the Dive

    Human Factors • UK Diving • Pre-Dive Preparation

    The Pre-Dive Faff Factor: How Small Hassles Steal Energy Before the Dive

    Sometimes the dive starts going wrong long before anybody gets wet.

    I have started thinking of it as the pre-dive faff factor.

    None of it is dramatic.

    An early alarm.

    A long drive.

    A heavy cylinder.

    Something left in the wrong bag.

    Boots refusing to cooperate.

    Somebody asking where the spare reel is.

    Walking what feels like half a county carrying a fully assembled UK dive setup.

    By itself, none of that is a problem.

    But stack enough little annoyances together and you can arrive at the water already tired, warm, irritated and mentally busy.

    Task loading does not begin at depth. Sometimes it begins in the car park.

    A UK dive day can start very early

    A lot of my UK diving involves a two-to-two-and-a-half-hour drive before I even reach the site.

    That often means an early start.

    Then there is unloading.

    Cylinder.

    Wing.

    Exposure suit.

    Weights.

    Fins.

    Regulators.

    Lights.

    Bags.

    The bits that somehow multiply every time you look away.

    Even if the dive itself is straightforward, the logistics can already be taking a bite out of the energy budget.

    The 600-metre lesson

    One of the most obvious examples for me was walking around 600 metres carrying dive equipment.

    There is a part of diving culture that can sometimes treat unnecessary suffering as if it is evidence of commitment.

    Personally, I would rather save the effort for the actual dive.

    That is why I bought a gear trolley.

    It is not glamorous.

    It is not technical.

    It is a set of wheels.

    But if those wheels save me from burning a chunk of my energy before I reach the water, they have done something useful.

    Carrying more than you need to prove that you can is not the same as preparing well.

    Heavy kit changes the whole morning

    UK diving kit is not subtle.

    A steel cylinder can still weigh around 14 kg when empty.

    Add a backplate, wing, regulators, ballast, drysuit, boots and everything else and suddenly you are moving around with the equivalent of an extra child attached to your back and hips.

    That matters before the dive.

    It matters on the walk in.

    It matters while standing around waiting.

    It matters at the entry.

    And it definitely matters when you are trying to get back out over rocks in a swell.

    Energy management is part of dive planning whether we call it that or not.

    Donning slowly is faster

    Drysuit diving taught me that rushing the process is usually a false economy.

    Donning and doffing a drysuit is something I prefer to do slowly and steadily.

    Heavy undersuits can make movement awkward.

    Rental suits can make fin donning feel like an Olympic flexibility event.

    Gloves, seals, zips, boots and hoses all become harder to manage if I am already hot and trying to hurry.

    Slowing down usually gets me ready quicker because I am not correcting mistakes created by rushing.

    Slow is smooth. Smooth is usually quicker than fixing something you rushed.

    Being too warm is task loading too

    I naturally run warm.

    That means I can be stood around in cold-water equipment feeling like I am slowly cooking while waiting to enter the water.

    Then I get underwater and my body and hands are wonderfully warm while my face feels as though somebody has pressed it against a freezer.

    UK diving has a sense of humour.

    The point is that thermal comfort is not only an underwater issue.

    Overheating while kitting up can leave you tired and irritated before the dive starts.

    For me, that is another reason not to automatically reach for the thickest possible undersuit.

    More insulation is not useful if it makes the whole preparation process harder than it needs to be.

    Organisation beats memory

    I do not want to rely on remembering where I put something while everyone is standing around waiting.

    The more I dive, the more I want equipment to have a predictable place.

    That applies underwater and on land.

    If I know which bag contains the spare mask, where the DSMB is, which pocket the backup spool lives in, and where the batteries are, I am not spending mental effort searching.

    The same principle that makes my BP/W feel cleaner underwater makes the dive day calmer on the surface.

    The less I have to search for, remember or improvise, the more capacity I keep for the dive.

    Bring what the dive actually needs

    One of the biggest changes in my equipment thinking has been moving away from carrying everything because I own it.

    If I am doing a daytime lobster dive, I do not need the same light redundancy I would take at night.

    If I am not doing a survey, I probably do not need a giant slate.

    If a piece of kit serves no purpose on that dive, carrying it can create more faff than benefit.

    This does not mean cutting safety equipment.

    It means making the equipment list deliberate.

    Required.

    Useful.

    Backup.

    Or staying in the bag.

    Pool testing saves open-water faff

    Hiring the five-metre pool to test our XDEEP ZENs was one of the better equipment decisions Gemma and I made.

    It cost about £50.

    For that, we got a controlled environment where we could adjust harnesses, check trim, practise skills and learn the rigs without adding current, waves, cold or a difficult exit.

    That kind of shakedown removes uncertainty.

    If I can discover that something rubs, moves or sits badly in a pool, that is one less problem waiting for me on the actual dive.

    If possible, I also like the idea of sticking a camera on the pool wall and recording the session.

    What feels perfectly horizontal may look rather more interpretive-dance when viewed afterwards.

    The entry should be part of the plan

    My St Abbs drysuit dives reinforced that the entry and exit are not just the bits before and after the “real” dive.

    They are part of the dive.

    A straightforward boat entry is very different from walking fully equipped over uneven ground.

    A calm ladder exit is very different from a rocky shore with a one-to-two metre swell.

    I much prefer boat diving.

    To be fair, I prefer boat diving in tropical water too, so this is hardly a surprising revelation.

    But whatever the site, I now want to understand how I am getting in and how I am getting back out before I start the dive.

    And plan the exit while you still feel fresh

    The exit can easily be the physically hardest part of a UK shore dive.

    You are carrying the same equipment you entered with.

    But now you may be tired.

    The cylinder may be lighter, but you are not necessarily feeling lighter.

    If the upper rocks are safe and stable, removing dumpable weight before completing the climb can make a big difference.

    That is not cheating.

    It is using the equipment as designed.

    The goal is to get everybody out safely, not preserve the artistic purity of your complete kit configuration until you reach the car.

    Helpful people can accidentally create more faff

    At St Abbs, someone tried to help me out of the water by grabbing the corrugated inflator hose on my wing.

    The hose disconnected.

    I went back underwater.

    The wing filled with water.

    Not ideal.

    But the lesson was not that nobody should help me.

    The lesson was that assistance works better when everybody understands the equipment.

    Afterwards, while repairing it, I explained that the cylinder valve or shoulder straps were safer places to get hold of me.

    I thanked him for trying.

    No drama required.

    A buddy can remove faff too

    Diving regularly with Gemma has advantages that have nothing to do with romance.

    We know each other’s equipment.

    We know roughly where things live.

    We know how we normally position ourselves.

    We know what “something feels off” looks like in each other.

    And occasionally she needs me to retrieve the crotch strap on her BP/W.

    That familiarity removes little bits of uncertainty.

    When Matthew dives with us, we can give him a predictable place in the team too.

    Predictability is underrated.

    The pre-dive checklist I am moving towards

    I am increasingly trying to make the preparation stage answer a few simple questions.

    • Am I rested enough for the dive I am planning?
    • Do I actually need everything I am carrying?
    • Is my equipment where I expect it to be?
    • Have I tested anything new before relying on it?
    • Am I correctly weighted for this configuration?
    • Do I understand the entry?
    • Do I understand the exit?
    • Is there an easier way to move the equipment to the water?
    • Does my buddy understand anything unusual about my setup?
    • Am I already tired, overheated or irritated?

    That last question may be the most important.

    Because sometimes the answer is not another equipment adjustment.

    Sometimes the answer is:

    Sit down.

    Drink something.

    Cool off.

    Stop rushing.

    Faff is a human-factors problem

    It is tempting to treat all of this as convenience.

    Nice-to-have organisation.

    Better bags.

    A trolley.

    Cleaner equipment.

    But I increasingly see it as human factors.

    Every unnecessary problem I solve on land consumes attention, patience or physical energy.

    If I arrive at the water already at 80% capacity, I have less left when something genuinely unexpected happens underwater.

    Good preparation is not about making the dive perfect. It is about keeping enough capacity for when it isn’t.

    Final thought

    I do not think the goal is to remove every bit of pre-dive faff.

    This is scuba diving.

    There will always be a hose that has somehow tied itself around something impossible.

    Somebody will forget where they put their mask.

    A glove will disappear.

    Britain will provide weather.

    The goal is to stop creating unnecessary problems for ourselves.

    Move the kit sensibly.

    Organise it.

    Test new configurations somewhere easy.

    Know the entry and exit.

    Bring what the dive needs.

    And arrive at the water with enough energy left to actually enjoy being there.

    Spend less energy on the faff so you have more left for the dive.

  • Task Loading: The Quiet Thing That Can Ruin a Dive

    Task Loading: The Quiet Thing That Can Ruin a Dive

    Human Factors • Task Loading • Dive Safety

    Task Loading: The Quiet Thing That Can Ruin a Dive

    Most dives do not suddenly become complicated. They become complicated one small thing at a time.

    Task loading is one of those diving phrases that sounds more complicated than the idea actually is.

    Put simply, it is what happens when too many things are demanding your attention at the same time.

    The important bit is that none of those things has to be particularly difficult on its own.

    Check gas.

    Watch your buddy.

    Hold depth.

    Navigate.

    Control buoyancy.

    Deal with cold.

    Sort a torch.

    Remember where the exit is.

    Keep an eye on your computer.

    Any one of those is manageable.

    Stack enough of them together and suddenly a diver who was perfectly capable five minutes ago starts making poor decisions.

    Task loading is rarely one big problem. It is lots of small problems all asking for attention at the same time.

    It often starts before the dive

    One thing I have become much more aware of is that task loading does not begin when I descend.

    It can begin hours earlier.

    An early alarm.

    A two-to-two-and-a-half-hour drive.

    Loading cylinders and kit.

    Walking hundreds of metres carrying equipment.

    Getting changed.

    Realising something is in the wrong bag.

    Someone else waiting for you.

    Weather getting worse.

    None of that is underwater yet, but all of it is already using energy and attention.

    That is one reason I bought a gear trolley.

    Carrying a full UK setup for 600 metres before the dive does not make me tougher.

    It just uses energy I would rather have available when I actually need it.

    Equipment can either add load or remove it

    My move to a backplate-and-wing changed how I think about equipment.

    In my earlier setup, if I managed to get horizontal, I could still have a slate, compass, knife, torch, beacon, magnetic clips, several spools, DSMBs and a large console hanging below me.

    Every dangling item was another thing that could move, snag, disappear behind me or need finding.

    I gradually moved towards giving everything a home.

    Routine-use equipment in one pocket.

    Emergency kit in the other.

    Backup torch clipped where I expect it.

    Nothing hanging because I could not decide where else to put it.

    The biggest compliment I can give my XDEEP ZEN is that once I am underwater, I tend to forget it exists.

    Gear that disappears into the background gives your brain somewhere else to spend its attention.

    Overweighting gave me a very literal lesson

    My first open-water drysuit dive gave me one of the clearest examples of task loading I have experienced.

    Including my backplate, I had been given around 19 kg.

    I now know that, depending on the suit, I am generally happier somewhere around 11–14 kg.

    That extra weight did not just mean carrying more lead.

    It meant carrying more gas in the suit to compensate.

    More gas meant a bigger moving bubble.

    A bigger bubble meant more attention needed for trim and buoyancy.

    Holding a two-minute hover at around 11 metres became much harder than it needed to be.

    The lesson was not simply:

    “Too much weight is bad.”

    It was:

    One setup mistake can quietly create several extra jobs for you underwater.

    Then the exit added another layer

    After that dive came the St Abbs exit.

    Rocky shore.

    One-to-two metre swell.

    Heavy steel cylinder.

    Ballast.

    Drysuit.

    Wing.

    Tired legs.

    Someone tried to help and grabbed the corrugated inflator hose on my XDEEP wing.

    The hose came off.

    I went back underwater and surfaced with a wing full of North Sea.

    At that point I was no longer dealing with one problem.

    I was dealing with fatigue, unstable footing, swell, heavy equipment and now a compromised wing.

    That is what stacking looks like.

    It does not require panic.

    It just requires the available mental and physical capacity to keep shrinking.

    Deep diving makes the budget visible

    Deep Diver showed me task loading in a different way.

    At 40 metres, I personally did not notice any obvious narcosis.

    The instructor could not see a difference in my example tasks either.

    But I could absolutely see the gas needle moving.

    I am a greedy breather.

    At that depth, gas use became very visible.

    So I was consciously avoiding wasted movement, checking which gas I was breathing, monitoring depth and watching the NDL disappear surprisingly quickly across repeated deep dives.

    None of those jobs was difficult by itself.

    But they all had to happen.

    That is one reason deeper diving feels different even when you feel calm.

    You have fewer spare resources.

    Forty metres also taught me something slightly embarrassing

    Depth itself can be quite boring.

    I remember hovering calmly, looking up at fish above me, out into the deep blue and down into the nothing as the wall continued beneath us.

    It was beautiful.

    But I also remember thinking:

    Why am I actually down here?

    The dive was costing me more gas, more NDL and more attention purely because of depth.

    That changed how I think about deep diving.

    If depth adds task loading, I want there to be an actual reason for accepting the cost.

    A wreck feature.

    A swim-through.

    Marine life.

    A training objective.

    Something.

    Forty metres simply because the computer says forty is not particularly interesting to me.

    Night diving did the opposite

    This is where task loading gets interesting.

    You would expect night diving to increase it.

    Darkness.

    Lights.

    Different communication.

    Reduced visibility.

    Different navigation cues.

    Yet for me, night diving often feels calmer.

    My world becomes the torch beam, my buddy, my instruments and the next few metres.

    The visual clutter disappears.

    Instead of trying to absorb an entire reef, I am dealing with a smaller bubble of information.

    That suits my brain.

    Night diving did not feel like having less information. It felt like having fewer distractions.

    But only if the kit is right

    Night diving also shows why redundancy has to be thought through beforehand.

    On a night dive, I take a primary light and two strong backups.

    If my primary fails, I do not want the failure itself to create a huge new decision-making problem.

    I know where the backup is.

    I know how to reach it.

    I know I still have another reserve.

    That reduces the mental cost of the failure.

    On a daytime lobster dive, I may only carry one light because losing it does not affect my ability to safely complete the dive.

    Redundancy is not just about carrying more.

    It is about making failures easier to manage.

    A calm buddy reduces load too

    Rescue Diver changed the way I look at other divers.

    I am more willing now to approach somebody who looks uncomfortable and simply ask:

    Hey there, how are you doing?

    I may misread somebody.

    They may be absolutely fine.

    But early communication is cheap.

    Waiting until somebody is visibly overwhelmed is expensive.

    A buddy team should reduce task loading for each other, not add to it.

    That means watching each other, keeping predictable positioning and solving small problems early.

    Team positioning helps

    Gemma and I tend to dive fairly close together.

    One of us leads and the other is slightly offset, around a metre away.

    When Matthew is with us, he takes the opposite side and we form a shallow V.

    It is not some grand tactical formation.

    It is simply easy to understand.

    I know roughly where they should be.

    They know roughly where I should be.

    If somebody is suddenly not there, that change becomes obvious.

    Predictability reduces the amount of active checking needed.

    Good habits should become boring

    I increasingly think one of the goals of training is to make important things boring.

    Checking gas.

    Knowing where the backup torch is.

    Finding the DSMB.

    Reaching the dump valve.

    Looking for your buddy.

    Holding trim.

    These things should not require a committee meeting inside my head.

    The more automatic the basics become, the more spare capacity I have when something genuinely unusual happens.

    That is also why I like practising equipment changes in a pool.

    I would rather discover how something behaves when nothing else matters.

    My warning signs for rising task loading

    I am still learning to recognise this in myself, but there are a few things I pay attention to.

    • I start making larger buoyancy corrections instead of small ones.
    • I stop noticing scenery because I am concentrating on equipment.
    • I repeatedly check the same instrument because I did not properly process the information the first time.
    • I become less aware of where my buddy is.
    • I feel rushed even when nobody is actually rushing me.
    • Simple tasks suddenly feel irritating.
    • I realise I am reacting rather than thinking ahead.

    None of those automatically means the dive must end.

    They mean I should notice what is happening.

    This is where Stop. Think. Assess fits

    Task loading is exactly why I like the Stop. Think. Assess framework.

    When the mental workload starts climbing, the instinct can be to move faster.

    Fix everything.

    Catch up.

    Continue.

    Sometimes the better response is the opposite.

    Stop.

    Stabilise.

    Work out which problem actually matters.

    Deal with that one.

    Pause.

    Reassess.

    When everything feels important, the first job is often deciding what is actually important.

    Final thought

    Task loading is dangerous partly because it does not always feel dramatic.

    You may simply feel busy.

    Slightly rushed.

    Slightly uncomfortable.

    Slightly behind the dive.

    And then another small thing happens.

    The goal for me is not to eliminate task loading.

    Diving will always require us to manage several things at once.

    The goal is to stop wasting capacity on problems I could have removed earlier.

    Better weighting.

    Cleaner equipment.

    Predictable buddy positioning.

    Proper redundancy.

    Enough rest.

    Slower decisions.

    And the willingness to stop when the stack starts getting too high.

    The safest spare capacity is the capacity you never wasted in the first place.