Tag: Dive Lights

  • Dive Lights: Primary, Backup and Beacon Choices

    Dive Lights: Primary, Backup and Beacon Choices

    Gear • Night Diving • Redundancy

    Dive Lights: Primary, Backup and Beacon Choices

    A dive light is simple until darkness, signalling and redundancy make it part of the plan rather than just another gadget.

    My current primary is the ZD710

    Recently I have been using the ZD710 on a Goodman handle as my main light for recreational diving.

    For the sort of dives I am doing now, it is a very comfortable setup.

    The handle keeps the light where I want it without turning one hand into a permanent torch holder, and the light easily covers the roughly 60-minute recreational dives that make up most of my current use.

    The best primary light is not the one with the biggest specification sheet. It is the one that fits the dive I am actually doing.

    ZD710 dive torch mounted on a Goodman-style handle
    My current recreational primary: the ZD710 on a Goodman-style handle.

    The Goodman handle changed how useful the light feels

    I like being able to use my hand while still having the light aligned with it.

    That matters for clipping things off, checking gauges, handling a spool or just communicating without constantly swapping a torch between hands.

    It also makes the light feel like part of the configuration rather than something I happen to be carrying.

    Backups are boring until they are not

    I carry backup lights because the failure mode is obvious.

    If the primary stops working on a daylight dive, that may just be annoying. On a night dive or somewhere the light is genuinely part of orientation and communication, it matters a lot more.

    My current backups include an orange OrcaTorch backup and four HiCloud dive torches in the wider kit pool.

    I do not need all of them clipped to me on every dive, but having multiple working lights available makes it much easier to build the redundancy appropriate to the dive.

    Beacons have a different job

    I also use small beacons as part of the wider lighting kit.

    I do not see them as a substitute for a torch. Their value is visibility and identification rather than illuminating the reef.

    That distinction matters because “light” is really several different jobs: seeing, being seen and signalling.

    Technical diving may change the equation

    As I move toward technical diving, longer runtimes and decompression stops are going to change what I ask from the primary light.

    I may well go back to a canister light for that kind of diving, with the ZD710 moving into the backup role.

    That would not mean the ZD710 suddenly became inadequate. It would mean the dive became longer and the consequences of losing the primary became more important.

    I am trying to build systems, not collect torches

    It is very easy with dive kit to buy another gadget because another gadget exists.

    I am trying to think in roles instead:

    • What is my primary?
    • What is my independent backup?
    • How long does the planned dive require the system to work?
    • How am I using light for communication?
    • What changes when the dive becomes longer or more complex?

    That is a much more useful way for me to decide what comes with me.

    Right now the ZD710 on the Goodman handle fits my recreational diving very well.

    As the diving changes, the lighting system can change with it.

    The goal is not more lumens. It is dependable light for the dive I planned.

  • My Current Dive Kit Setup: What I Carry and Why

    My Current Dive Kit Setup: What I Carry and Why

    Gear • Dive Kit • Diver Development

    My Current Dive Kit Setup: What I Carry and Why

    My equipment has slowly changed from “carry everything” to “everything has a reason and a home.”

    My current dive setup looks very different from the gear configuration I started with.

    Early on, I carried almost anything I thought might possibly be useful.

    Slate.

    Compass.

    Knife.

    Lights.

    Beacon.

    Multiple spools.

    Multiple DSMBs.

    Huge console.

    If I owned it, there was a reasonable chance it was hanging off me somewhere.

    These days I think about kit differently.

    If I need it, it should have a reason for being there and a predictable place to live.

    The foundation: XDEEP ZEN backplate and wing

    My normal backmount setup is built around an XDEEP ZEN wing with the ZEN NX aluminium backplate.

    I chose aluminium because my diving is split between UK diving and trips that involve air travel.

    It gives me the rigid platform I want without making airline luggage even more entertaining than it already is.

    The biggest benefit is not that it looks technical.

    It is that underwater I barely notice it.

    Once the harness is adjusted properly and the weight comes off my back in the water, the system almost disappears.

    That is exactly what I want from equipment.

    Exposure protection depends entirely on the dive

    I do not have one exposure setup that I try to force onto every environment.

    For warmer diving I still enjoy being in a wetsuit.

    In the Red Sea, I actually like feeling the water against my skin.

    Depending on conditions, I have a 5 mm wetsuit, a 4 mm shortie and lighter thermal options.

    For colder UK diving I use a drysuit.

    I currently have a neoprene drysuit, although a custom trilaminate suit is high on my future purchase list because I want more mobility and less of the Maggie-Simpson-in-a-snowsuit experience.

    I also have my 7 mm semi-dry, which still has a place.

    The important thing for me is choosing the exposure protection that fits the actual conditions rather than automatically reaching for the biggest or warmest option.

    Regulators: several options, one job

    Over time I have ended up with a fairly substantial regulator collection.

    My first stages include Scubapro MK25, MK17 EVO and additional MK25 EVO units.

    Second stages include G260s, an A700, R380s, R190 and R105.

    I do not carry all of them on every dive, obviously.

    The advantage of having multiple regulator sets is being able to configure cylinders for different kinds of diving without constantly stripping everything apart.

    As I move further towards sidemount and technical diving, that flexibility becomes increasingly useful.

    Cylinders: this got out of hand quite quickly

    I appear to have accidentally collected cylinders.

    At the moment the collection includes multiple 12-litre steels, a 2 × 12-litre twinset, 10-litre stumpies, 7-litre cylinders, 5-litre cylinders, a 3-litre and a 2-litre.

    There are also pony mounts and sidemount or cross-body options.

    That sounds excessive until you start changing configurations.

    A cylinder that makes sense as a normal back-gas cylinder is not necessarily the cylinder you want as a pony, stage or suit-inflation bottle.

    The collection gives me options.

    It also gives Gemma plenty of evidence whenever she wants to argue that my definition of “essential dive equipment” has become dangerously flexible.

    Computers: information without becoming obsessed with screens

    My current dedicated dive computer is an Aqualung i330R.

    I also use an Apple Watch Ultra, with the Ultra 3 becoming part of the wider setup.

    Longer term, I am looking at moving towards a more technical-capable dedicated computer with air integration.

    The computer matters enormously, but I do not want to spend the whole dive staring at it.

    Depth.

    Time.

    Gas.

    NDL.

    Deco information when that eventually becomes relevant.

    I want those checks to become routine enough that I can process the information quickly and then get back to actually diving.

    Lights depend on whether darkness is part of the problem

    My main lights currently include an Orca D610 and Orca ZD710, along with several backup lights.

    I also carry small blue and red Orca beacons when appropriate.

    My redundancy changes with the dive.

    On a night dive, I take a primary and two strong backups.

    That means if the primary dies, I still move onto a proper light while retaining another backup.

    On a normal daytime dive where a torch is only useful for looking into cracks for lobsters, I may take only one.

    Redundancy should match the consequence of losing the item, not the size of the equipment cupboard at home.

    My right pocket: things I expect to use

    My right pocket is basically the utility pocket.

    It contains the things I reasonably expect to reach for during the dive.

    • Wetnotes containing the dive plan or tables
    • Slate where required
    • Routine DSMB
    • Routine spool or reel
    • Second backup torch where appropriate

    My first backup torch normally sits clipped to the right shoulder D-ring and is held neatly against the harness with a ranger band.

    If I am doing a dive with lots of recording — a survey or conservation activity, for example — I may use a wrist slate instead.

    My left pocket: safety and emergency kit

    The left pocket is more about things I hope I do not need.

    • Spare mask
    • Safety spool
    • Yellow emergency SMB or lift bag where appropriate
    • Spare double-ender
    • CPR mask
    • Shears or cutting tool
    • Small multi-tool where appropriate
    • Waterproof personal ID card

    I use a waterproof ID card containing a QR code.

    It is not something I particularly enjoy thinking about, but if I am ever in a situation where I cannot identify myself, I find some comfort in knowing that there is still information available to help connect me back to my family.

    DSMBs and spools: I may own slightly too many

    My DSMB and spool collection has become fairly healthy.

    I have multiple DSMBs, finger spools ranging from roughly 10 metres to 50 metres, and larger reels extending out towards 150 metres.

    I also have surface buoys and flags.

    But owning ten spools does not mean ten spools need to come on the dive.

    Normally there is a routine DSMB and deployment spool, plus an emergency or safety option where the dive justifies it.

    Everything else can remain in the bag until there is an actual reason to carry it.

    Cutting tools should be reachable

    I have never understood the point of carrying an emergency tool somewhere I cannot actually reach in an emergency.

    A cutting device should be secure but accessible.

    Shears and compact cutting tools make more sense to me than carrying something enormous simply because it looks impressive.

    As with the rest of my setup, the important question is:

    Can I reach it instinctively when I am stressed?

    The £20 dive mirror

    One of the cheapest pieces of equipment I have added has turned out to be surprisingly useful.

    A small dive mirror.

    I originally bought it before leading part of a St Abbs dive with Matthew behind me.

    It meant I could glance into the mirror and check that he was still where I expected without constantly turning around.

    It is also useful for doing my own bubble checks.

    Twenty quid.

    Tiny.

    Hardly glamorous.

    Very useful.

    My fins and boots are deliberately boring

    My main fins are black RK3s.

    I also use different boots depending on the site and exposure setup, including Cressi rock boots and other dive boots.

    That is one reason I am leaning towards socks rather than permanently attached boots when I eventually buy my trilaminate drysuit.

    I want the ability to choose the boot for the environment rather than have the suit make that decision for me.

    Hoods and gloves: UK diving’s glamour department

    I have accumulated different hood and glove thicknesses — roughly 3 mm, 5 mm and heavier cold-water options.

    Again, I would rather choose based on conditions than automatically wear the thickest thing I own.

    My hands can be beautifully warm in a drysuit while my face feels painfully cold.

    Nobody said UK diving was supposed to make complete sense.

    Nitrox analyser

    I carry my own NCR Nitrox analyser.

    If I am going to breathe a gas mixture, I want to know what is actually in the cylinder rather than rely entirely on somebody else’s label.

    That becomes even more important as I move further towards technical training and multiple-gas configurations.

    First-aid and emergency equipment

    My surface emergency kit has grown alongside my Rescue training.

    I have a substantial EFR kit that includes items such as splints and general first-aid equipment.

    An oxygen kit is another area I want to develop further.

    This equipment obviously does not come underwater with me.

    But it is still part of what I consider a complete dive setup.

    The dive does not begin at the descent and it does not end at the safety stop.

    I am still changing the setup

    This is not a finished configuration.

    I do not think it ever will be.

    The next big changes are likely to come from sidemount, technical training and a trilaminate drysuit.

    That will change where cylinders live.

    It may change buoyancy strategy.

    It will change gas planning.

    Some equipment will move.

    Some will disappear.

    Some new items will undoubtedly arrive in suspiciously large cardboard boxes.

    The important part is that the changes should solve problems rather than simply create a more impressive-looking equipment pile.

    My rule for deciding what comes on the dive

    I increasingly put equipment into three groups.

    Needed for life support or safety

    If losing it threatens the ability to safely complete the dive, I think seriously about redundancy.

    Needed to complete the planned dive

    This depends on the mission.

    Night diving needs lights.

    Surveys need recording equipment.

    A lobster dive may need a torch but not three of them.

    Nice to have

    This is where I am much more ruthless now.

    If I cannot explain what the item is doing for me on this particular dive, perhaps it can enjoy a relaxing afternoon in the dive bag.

    One is none and two is one — sometimes

    I like the basic redundancy principle of “one is none and two is one.”

    But I do not apply it blindly.

    Losing a primary light during a night dive is very different from losing the torch I was using to look underneath a rock at midday.

    Redundancy should be related to consequence.

    And carrying a backup is not enough.

    I need to know where it is.

    I need to be able to reach it.

    I need to be able to deploy it without dropping something else.

    That is why bolt snaps and bungee inside pockets matter.

    A shiny backup reel is significantly less useful when it is slowly disappearing into the abyss.

    Gear should reduce task loading

    This is probably the principle connecting the entire setup.

    I do not want equipment constantly demanding my attention.

    The harness should fit.

    The regulator should be where I expect it.

    The backup torch should be reachable.

    The DSMB should be in the same pocket.

    Nothing should be dangling around underneath me.

    If something fails, I should already know what comes next.

    The more of that becomes automatic, the more attention I have available for the environment, my buddy and the actual reason I got into the water.

    Final thought

    My current kit setup is not the correct scuba configuration.

    It is simply the configuration that currently works for me.

    Gemma’s setup is slightly different.

    Matthew’s will be different again.

    And mine will almost certainly change as I move further towards sidemount and technical diving.

    What matters more than any particular brand or piece of equipment is that I understand why it is there.

    It should fit.

    It should have a home.

    It should solve a problem.

    And ideally, once I am underwater, I should barely have to think about it.

    Carry what the dive needs. Know where it lives. Let the kit disappear.

  • Night Diver: Why Darkness Made Me Calmer

    Night Diver: Why Darkness Made Me Calmer

    Training Notes • Night Diver • Human Factors

    Night Diver: Why Darkness Made Me Calmer

    I expected night diving to feel more stressful. Instead, the darkness narrowed the world and made me calmer.

    Night Diver was one of those courses I expected to feel more intense than it actually did.

    On paper, night diving sounds like it should add a lot: darkness, torches, different communication, reduced visibility, different marine life, and the simple fact that the surface world has disappeared into blackness.

    I expected that to make the dive feel busier.

    Instead, something different happened. The darkness made the dive feel smaller, quieter and more focused.

    For me, that was the surprise.

    A full-on start to the trip

    My first night dive came very early in the holiday.

    I had landed at around 23:00, then by midday the next day I was already doing my shakedown dive. That same evening I was doing night dive one.

    So this was not a perfectly rested, gentle, slow introduction. I had travelled, arrived late, got back into the water, checked kit and weighting, then went straight into the first night dive.

    And even though I was not fully rested, that first night dive was amazing.

    The world gets smaller

    The biggest thing I noticed was how the world changes at night.

    During the day, there is so much to take in. The reef, the fish, the light, the wider scene, other divers, the blue water, the boat, the guide, the group, the camera moments, the everything.

    At night, your world becomes the beam of your torch, your buddy, your gauges, your breathing and the next few metres in front of you.

    That could sound limiting, but I did not experience it that way. I found it calming.

    It reduced the amount of visual noise. It made the dive feel simpler, not more complicated.

    Darkness changed my focus

    Night diving made me focus differently.

    Instead of scanning a whole reef or trying to take in everything at once, I was paying attention to the things that mattered in that moment: light position, buddy location, buoyancy, depth, gas, direction and how the dive felt.

    It made the dive feel more deliberate.

    I like that about it. There is something about narrowing the field of attention that works well for my brain. It takes away some of the clutter and leaves the important things closer to the surface.

    Night diving did not feel like diving with less information. It felt like diving with fewer distractions.

    Lights become communication

    One of the useful lessons from Night Diver is that a torch is not just a way to see.

    It becomes part of how you communicate.

    You use it to get attention, signal okay, point to things, show where you are, avoid dazzling people, and keep the buddy team connected without turning every moment into a hand-signal performance.

    That means light discipline matters.

    Where you point the torch matters. How calmly you move it matters. Whether you sweep it around like a caffeinated lighthouse definitely matters.

    Good torch use makes the dive feel calmer. Bad torch use can make a calm dive feel busy very quickly.

    Buddy awareness feels different at night

    Buddy awareness also changes at night.

    In daylight, it is easier to use peripheral vision and the wider scene to keep track of people. At night, you are more dependent on light, position and deliberate checks.

    That made me more aware of spacing and movement.

    It also made the buddy team feel more important. You are not just two divers near each other. You are two pools of light moving through the dark, and it is very obvious when one of those lights is no longer where you expected it to be.

    That is useful. It makes connection visible.

    The reef feels different after dark

    One of the best parts of night diving is that the same site does not feel like the same site.

    The reef changes character. Colours look different under torchlight. Fish behave differently. Small details stand out more. Things that disappear into the daytime background suddenly become interesting.

    It is not just diving in the dark. It is diving in a different version of the same place.

    That is probably why the first night dive stuck with me. I was tired, I had only just arrived, and still the dive cut through all of that.

    It felt special.

    Why it suited my brain

    I have written before about diving with ASD and how scuba can work well for my brain because it has structure, rules, kit, checks and a clear task focus.

    Night diving added another layer to that.

    The darkness narrowed the environment. The torch gave me a clear focus point. The procedures mattered. The buddy checks mattered. The communication mattered. The dive had a rhythm.

    Instead of making things feel chaotic, it made things feel contained.

    That is not what I expected, but it makes sense now. Sometimes less visual information is not a problem. Sometimes it is a relief.

    Night diving still needs respect

    None of this means night diving is something to treat casually.

    Darkness changes the dive. You need reliable lights, backups, clear communication, proper buddy awareness, good buoyancy, a sensible plan and enough calm to avoid rushing.

    It also makes simple problems feel bigger if you have not prepared properly.

    A failed torch, a separated buddy, poor buoyancy, uncertainty about direction or a messy ascent can all become more stressful at night.

    But when it is planned properly, night diving can feel incredibly peaceful.

    Confidence through calm

    Night Diver gave me a different kind of confidence.

    Not loud confidence. Not “look what I can do” confidence.

    More like quiet confidence: I can slow down, check the important things, use the light properly, stay connected with my buddy, and let the dive unfold without trying to force it.

    That kind of confidence matters to me.

    It is the same type of confidence I want to keep building through UK diving, Rescue, drysuit practice, sidemount and eventually technical training. Calm, structured, aware and useful.

    Final thought

    Night Diver surprised me.

    I expected darkness to add stress. Instead, it narrowed the world in a way that made me feel calmer and more focused.

    The torch beam became the centre of the dive. Buddy awareness became more deliberate. Communication became simpler and more intentional. The reef felt different, quieter and more intimate.

    It reminded me that not every challenge in diving feels the way you expect. Sometimes the thing that sounds like it will add task loading actually removes distraction.

    For me, night diving did exactly that.

    In the dark, the dive got smaller — and somehow I got calmer.