Category: Technical Diving

  • Why Sidemount Appeals to Me More Than Twinset

    Why Sidemount Appeals to Me More Than Twinset

    Technical Diving • Sidemount • Diver Development

    Why Sidemount Appeals to Me More Than Twinset

    I already own twin 12s. The problem is that somebody eventually has to pick the bloody things up.

    I already have a twinset.

    So my interest in sidemount is not based on never having considered the obvious alternative.

    Manifolded twins make complete sense for a lot of diving, and plenty of very good technical divers use them.

    But the more I think about the diving I actually want to do, the more sidemount seems to fit me better.

    Not because it is newer.

    Not because it looks more technical.

    And definitely not because I think it will magically make me a better diver.

    It simply seems to solve more of the problems that matter to me.

    The right configuration is not the most impressive one. It is the one that makes sense for the dive and the diver.

    The twinset problem starts on land

    My biggest issue with twinset is not what happens underwater.

    It is everything required to get the thing there.

    Have you ever picked up twin 12s?

    Now add your backplate, wing, regulators and whatever ballast your exposure protection requires.

    That is a substantial lump of equipment sitting on your back before the dive has even started.

    For UK diving, that matters.

    We have already established that some of our dive sites have an unhealthy relationship with car parks, rocks, long walks and inconvenient exits.

    I do not see much virtue in exhausting myself carrying one enormous rigid package to the water when there may be another way of achieving the same goal.

    Sidemount changes the logistics

    One of the big attractions of sidemount is being able to move the cylinders independently.

    Instead of carrying twin 12s as one giant unit, I can move cylinders separately and clip them on nearer the water where the site allows it.

    That immediately changes the physical cost of the dive day.

    Easier entry.

    Easier exit.

    Less weight sitting on my spine while walking around on land.

    Given how much I already think about conserving energy before a UK dive, that matters enormously to me.

    I want to spend my energy diving, not proving I can carry the dive site on my back.

    Travel makes the difference even bigger

    My diving is not exclusively UK based.

    I travel.

    And airlines tend to become strangely unreasonable when you suggest taking a manifolded set of twin 12-litre steel cylinders as hand luggage.

    Sidemount is much more attractive in that environment.

    I can travel with the harness, wing, regulators and cylinder rigging, then configure suitable hire cylinders at the destination.

    The cylinders do not have to belong to me for the configuration to work.

    Twinset is very different.

    If the destination does not have a correctly configured manifolded twinset available, I cannot simply turn two ordinary hire cylinders into the same setup with a few bits from my luggage.

    For somebody who expects to keep combining UK diving with trips abroad, sidemount feels far more portable.

    My first little taste came from a pony bottle

    Deep Diver was probably where sidemount stopped being an abstract idea for me.

    At 40 metres I was carrying an additional side-slung pony.

    It obviously was not a full sidemount configuration.

    But having a cylinder beside me gave me a small taste of what moving gas off my back could feel like.

    I liked it.

    I liked being aware of the additional gas.

    I liked the planning around it.

    And I liked having the cylinder somewhere I could see and interact with easily.

    That experience was one of the things that pushed me into looking at sidemount much more seriously.

    Independent gas appeals to my brain

    One of the strongest technical attractions for me is having two independent cylinder and regulator systems.

    That changes how I think about redundancy.

    Rather than one manifolded back-gas system, I have gas distributed across independent systems beside me.

    Of course, that also introduces new responsibilities.

    Gas has to be managed properly between cylinders.

    Regulators have to be used deliberately.

    Cylinder pressures have to remain part of the dive plan rather than becoming something I vaguely check whenever I remember.

    Weirdly, that is part of what attracts me.

    I like systems where the “what if?” has an answer before the dive begins.

    Freedom underwater matters too

    Sidemount also looks like it will suit the way I want to move underwater.

    The word I keep coming back to is freedom.

    I do not want to feel locked inside one large rigid package.

    With cylinders beside me, I can interact with them.

    I can reach the valves.

    I can change their position.

    I can trim the cylinders rather than simply accepting wherever a rigid twinset puts the mass.

    That flexibility appeals to me a lot.

    Then there are wrecks

    Wreck diving is one of the big reasons I am interested in technical progression.

    I have already enjoyed being inside wrecks such as the Thistlegorm.

    What interests me is sensible penetration and swim-throughs where there is actually something worth going in to see.

    I am not particularly interested in forcing myself through tiny restrictions purely so I can later tell somebody that I fitted.

    Sidemount gives me more options around wreck structure.

    The cylinders sit alongside me rather than forming one wide rigid block across my back.

    They can also be moved when the environment and training make that appropriate.

    That does not turn every hole in a wreck into an invitation.

    Training, gas, line work, team planning and exit strategy still matter.

    But the configuration gives me options.

    Depth is not really the goal

    This links back to something Deep Diver taught me.

    I am not particularly interested in going deeper simply because I can.

    Forty metres is just forty metres.

    If there is a wreck feature at 38 metres, a swim-through, something unusual to see or a proper training objective, then the depth may be justified.

    If the only objective is touching the number and coming back up, I am not especially interested.

    Technical training appeals to me much more because of what the planning can unlock.

    More options.

    More redundancy.

    Longer planned dives.

    Wreck penetration.

    Structured decompression where appropriate.

    Better answers to failures.

    Technical diving can sound backwards from the outside

    People sometimes hear “technical diving” and immediately translate it to:

    More dangerous diving.

    I understand why.

    The dives can involve greater complexity, different gases, overhead environments or decompression obligations.

    But one thing that appeals to me is how much attention technical training gives to planning failures before they happen.

    What if a regulator fails?

    What if gas disappears?

    What if the planned exit becomes unavailable?

    What gas do I need to solve the problem?

    What is the team doing?

    What is the backup?

    I love that kind of thinking.

    Not because complexity automatically creates safety.

    It does not.

    But deliberate redundancy and planning can create options when something changes.

    I know I am going to get worse before I get better

    I am not expecting to put on a sidemount wing and immediately look like I have been diving the configuration for ten years.

    Quite the opposite.

    I expect a few fairly substantial steps backwards.

    My current trim and buoyancy feel increasingly natural.

    Changing the entire buoyancy and cylinder configuration means learning parts of that again.

    Where does the gas sit?

    Where do the cylinders sit?

    How does the wing behave?

    How does my centre of gravity change?

    How does propulsion feel with cylinders alongside me?

    I know there will be dives where I look significantly less polished than I currently do.

    That is fine.

    I would rather temporarily look like a beginner again than pretend a new configuration requires no relearning.

    Fit the system first

    When I eventually start the sidemount course, the first thing I want is not a long list of impressive drills.

    I want the wing fitted correctly.

    Then I want the cylinders sitting correctly.

    Perfectly horizontal.

    Close to the body.

    Valves where they should be.

    Nothing hanging down like a pair of shopping bags.

    Once the platform is right, then I want to start learning the skills.

    That order matters to me.

    I do not want to spend a course compensating for a badly fitted rig and accidentally turn those compensations into habits.

    The current front runner

    At the moment, the XDEEP STEALTH 2.0 TEC is the system sitting at the top of my list.

    I have also looked at systems from Hollis, Apeks and others.

    The STEALTH keeps pulling me back because it appears to line up with the direction I want my diving to go.

    But this is exactly where I need to follow my own gear rule.

    Test everything and choose what disappears into the background for you.

    I do not want to buy a sidemount system purely because the specification sheet looks good or because I already like another XDEEP product.

    I want experience in the configuration before treating the buying decision as final.

    Sidemount first, then Tec 40?

    I would be happy for my sidemount and Tec 40 progression to overlap.

    But at the moment I am leaning towards doing sidemount first.

    The reason is task loading.

    If I am still consciously thinking about where my cylinders sit, how the wing behaves or how to manage the configuration, that is attention I cannot spend elsewhere.

    Tec 40 will introduce its own procedures and planning.

    I would rather have the basic sidemount platform feeling familiar before I start layering more complexity on top.

    Get the platform boring first. Then add complexity.

    This will not be my “technical-only” setup

    One thing I am already fairly confident about is that I do not see sidemount as something I would save for special technical dives.

    Once I am properly trained and comfortable, I can genuinely see myself using it for around 90% of my diving.

    Recreational dives too.

    If the configuration gives me easier entries, independent gas, clean trim, good travel options and freedom underwater, I do not see why I would leave it at home simply because the planned dive is inside recreational limits.

    The other 10% would probably be the simplest dives where a single cylinder on my XDEEP ZEN is the obvious answer.

    That gives me two configurations rather than forcing one setup onto everything.

    At first, though, I want to use it constantly

    When I first qualify in sidemount, I want to use it whenever reasonably possible.

    Not because I think it is automatically the best setup for every dive.

    Because I need repetition.

    I want gas switching to stop feeling novel.

    I want clipping and unclipping cylinders to stop requiring conscious thought.

    I want the valves to be exactly where my hands expect them.

    I want the trim to become normal.

    I want to stop thinking:

    “I am diving sidemount.”

    And simply think:

    “I am diving.”

    Then it becomes another tool

    Once that confidence exists, my attitude changes.

    Sidemount does not need to win.

    Single-tank backmount does not need to win.

    I just need to choose the tool that makes sense.

    Simple recreational dive where a single cylinder on the ZEN is easiest?

    Use the ZEN.

    Dive where independent cylinders, easier transport, wreck flexibility or technical planning make sidemount the better configuration?

    Use sidemount.

    That is ultimately where I want to end up.

    Final thought

    Sidemount appeals to me more than twinset because it seems to fit both my diving and the way I think.

    It reduces the part I dislike most about twins — carrying an enormous rigid package around on land.

    It works better with the fact that I travel.

    It gives me independent gas systems.

    It gives me more flexibility around wrecks and swim-throughs.

    And it looks like a configuration I could use for far more than technical dives.

    But none of that means I expect it to be easy.

    I fully expect to get worse before I get better.

    I expect to relearn trim.

    Relearn buoyancy.

    Learn new gas habits.

    Learn new equipment habits.

    And spend a lot of time making tiny adjustments until the configuration stops demanding my attention.

    That is the goal.

    Learn it until sidemount stops feeling like sidemount — then choose the right tool for the dive.

  • How I Track Cylinders, Gas and Kit

    How I Track Cylinders, Gas and Kit

    Tools • Equipment • Organisation

    How I Track Cylinders, Gas and Kit

    Once the cylinder collection reached sixteen, “I’m sure that one is in test” stopped being an acceptable database.

    Sixteen cylinders is enough to need a system

    I currently have sixteen cylinders in the wider kit pool.

    That sounds faintly ridiculous when written down, but different sizes and uses accumulate surprisingly quickly once diving expands beyond one recreational single cylinder.

    The problem is that every physical cylinder comes with information that matters: what it is, what gas is in it, when it was filled, whether it has a current analysis, when its test is due and whether O2-clean status matters for how I intend to use it.

    At that point memory is not a system.

    If I have to stare at a cylinder and think “I’m pretty sure…”, the tracking has already failed.

    A labelled scuba cylinder from Martin's personal cylinder collection
    Giving each physical cylinder its own identity makes it much easier to connect the tank in front of me with its service and gas record.
    Multiple scuba cylinders stored together ready for tracking and use
    With sixteen cylinders in the wider kit pool, the system has to work across a collection rather than one or two familiar tanks.

    Every cylinder gets an identity

    I am moving toward treating each cylinder as its own record rather than just “one of the 12s”.

    An ID label gives me something simple to connect the physical object to the digital record.

    That means the app can hold the manufacturer serial, capacity, current gas and service information without me trying to decode a row of nearly identical steel cylinders in the garage.

    Gas is a current state, not a permanent property

    A cylinder is not “the Nitrox one” forever.

    What matters is what is actually in it now.

    So the useful fields for me include gas type, oxygen percentage where relevant, fill pressure and whether the analysis is current.

    The point is not to replace proper gas analysis or labels. The digital record is there to support the physical process, not pretend it happened.

    Service dates are where software earns its keep

    Hydro, visual inspection and O2-clean status are exactly the sort of things that are easy to remember until suddenly they are not.

    With a couple of cylinders, a mental note might survive.

    With sixteen, I want the system to show me what is coming due rather than discovering it when I am already trying to get something filled.

    ZeusTek Diving cylinder and gas tracking dashboard
    The ZeusTek Diving cylinder view brings gas, fills and service information together so I can see what needs attention before a dive day.

    The same idea extends to the rest of the kit

    Cylinders are the obvious case because they have formal test and gas information attached to them, but I am gradually using the same thinking across other equipment.

    Regulator service history, loadouts, what belongs together and what is ready to go all become much easier when the information is in one place.

    This is one of the reasons the ZeusTek Diving WPA app keeps growing. I am building it around the questions I repeatedly need answered.

    I want less pre-dive faff, not more admin

    The danger with any tracking system is that it becomes a hobby in its own right.

    I do not want to spend twenty minutes entering data for every five minutes I spend actually diving.

    The system has to save time overall.

    If I can look at one screen and know which cylinders are in test, what gas they contain and what needs attention, then the admin has earned its place.

    I like systems, but only when they reduce uncertainty.

    Sixteen cylinders is enough equipment that I want facts, not memory and crossed fingers.

    Good organisation should make the dive day feel simpler, not more complicated.

  • Dive Lights: Primary, Backup and Beacon Choices

    Dive Lights: Primary, Backup and Beacon Choices

    Gear • Night Diving • Redundancy

    Dive Lights: Primary, Backup and Beacon Choices

    A dive light is simple until darkness, signalling and redundancy make it part of the plan rather than just another gadget.

    My current primary is the ZD710

    Recently I have been using the ZD710 on a Goodman handle as my main light for recreational diving.

    For the sort of dives I am doing now, it is a very comfortable setup.

    The handle keeps the light where I want it without turning one hand into a permanent torch holder, and the light easily covers the roughly 60-minute recreational dives that make up most of my current use.

    The best primary light is not the one with the biggest specification sheet. It is the one that fits the dive I am actually doing.

    ZD710 dive torch mounted on a Goodman-style handle
    My current recreational primary: the ZD710 on a Goodman-style handle.

    The Goodman handle changed how useful the light feels

    I like being able to use my hand while still having the light aligned with it.

    That matters for clipping things off, checking gauges, handling a spool or just communicating without constantly swapping a torch between hands.

    It also makes the light feel like part of the configuration rather than something I happen to be carrying.

    Backups are boring until they are not

    I carry backup lights because the failure mode is obvious.

    If the primary stops working on a daylight dive, that may just be annoying. On a night dive or somewhere the light is genuinely part of orientation and communication, it matters a lot more.

    My current backups include an orange OrcaTorch backup and four HiCloud dive torches in the wider kit pool.

    I do not need all of them clipped to me on every dive, but having multiple working lights available makes it much easier to build the redundancy appropriate to the dive.

    Beacons have a different job

    I also use small beacons as part of the wider lighting kit.

    I do not see them as a substitute for a torch. Their value is visibility and identification rather than illuminating the reef.

    That distinction matters because “light” is really several different jobs: seeing, being seen and signalling.

    Technical diving may change the equation

    As I move toward technical diving, longer runtimes and decompression stops are going to change what I ask from the primary light.

    I may well go back to a canister light for that kind of diving, with the ZD710 moving into the backup role.

    That would not mean the ZD710 suddenly became inadequate. It would mean the dive became longer and the consequences of losing the primary became more important.

    I am trying to build systems, not collect torches

    It is very easy with dive kit to buy another gadget because another gadget exists.

    I am trying to think in roles instead:

    • What is my primary?
    • What is my independent backup?
    • How long does the planned dive require the system to work?
    • How am I using light for communication?
    • What changes when the dive becomes longer or more complex?

    That is a much more useful way for me to decide what comes with me.

    Right now the ZD710 on the Goodman handle fits my recreational diving very well.

    As the diving changes, the lighting system can change with it.

    The goal is not more lumens. It is dependable light for the dive I planned.

  • Planning for Sharm 2027

    Planning for Sharm 2027

    Trip Planning • Red Sea • 2027

    Planning for Sharm 2027

    We already know we love diving there. The interesting bit now is working out how much training to mix into a three-week family trip.

    We are going back

    After diving with Elite in Egypt, the obvious question was not whether we wanted to return.

    It was how soon we could sensibly do it.

    The current plan is to be back in Sharm from 28 June to 21 July 2027, staying in an Airbnb arrangement recommended through Jenny and Wessam and diving again with the people we already know.

    That familiarity matters. A holiday is a lot easier when the diving centre is not another unknown quantity to solve on day one.

    This trip is not about collecting courses. It is about building a lot of good diving around a few carefully chosen goals.

    The family plan matters more than my course list

    This is a trip for me, Gemma and Matthew.

    I want us to have plenty of days where the only objective is to go diving together and enjoy being in the Red Sea.

    We are looking at roughly 10–14 days of diving depending on how the courses fit, rather than trying to cram training into every available morning.

    Gemma is interested in doing Deep while we are there, and Matthew will be diving with us as well.

    My own direction is getting more technical

    My interests are changing.

    I still love ordinary recreational diving, but I am increasingly curious about sidemount and technical training.

    Tec 40 is the obvious first step I keep coming back to, with Tec 45 as a possibility if the progression, time and experience all make sense.

    I am not treating Tec 45 as something I am entitled to bolt onto the holiday because it exists on a course list. If Tec 40 needs to stand on its own, that is fine.

    Sidemount could make the trip even more interesting

    I have also asked about sidemount training and whether a suitable wing could be rented rather than me immediately travelling with another mountain of equipment.

    Sidemount is appealing to me for a lot of reasons: independent gas, flexibility, easier equipment handling and where I think my longer-term diving may be heading.

    Doing the course somewhere warm and clear has obvious appeal, but I also want whatever I learn to transfer back to UK diving rather than becoming a holiday-only configuration.

    Three weeks gives us something valuable: breathing room

    The best part of having three weeks is that not every day has to be productive.

    We can have training days, family dive days, easier days and rest days without feeling that one weather change or tired morning has destroyed the whole plan.

    That is exactly how I want to approach it.

    I would rather finish the trip wishing I had squeezed in one extra dive than spend the last week knackered because I treated a holiday like a military exercise.

    What would make the trip a success

    For me, a successful Sharm 2027 would be pretty simple:

    • lots of enjoyable dives with Gemma and Matthew;
    • Gemma getting the Deep training she wants;
    • me making a sensible next step toward sidemount and/or Tec 40;
    • enough repetition that new skills start to feel normal;
    • coming home more experienced rather than merely more certified.

    I am excited by the courses, obviously.

    But the real attraction is three weeks of being around diving, doing it repeatedly, and sharing it with the people I most want beside me.

    The qualification is a bonus. The diving is the point.

  • Deep Diver: More Than Just a Bigger Number

    Deep Diver: More Than Just a Bigger Number

    Training Notes • Deep Diver • Human Factors

    Deep Diver: More Than Just a Bigger Number

    Deep Diver taught me that depth is only a number. The real lesson was gas, limits, standards and having a reason to be there.

    Deep Diver sounds like it should be about a number.

    How deep did you go? Did you get to 40 metres? Did it feel different? Did you feel narced? Did you get the card?

    Those are easy questions to ask, but they are not the best lessons from the course.

    For me, Deep Diver did not make depth feel like a trophy. It made depth feel like a set of costs: gas, time, temperature, no-decompression limit, attention and planning.

    It also made me realise something I did not expect to come away with: I do not need to go deep unless there is actually a reason to be there.

    A busy start to the holiday

    I did my Deep and Night Diver training with Pyramids over the first four days of the holiday.

    It was not a gentle, lazy start. I landed at around 23:00, and by midday the next day I was already doing my shakedown dive. That same evening I did my first night dive.

    I was not fully rested, but that first night dive was amazing — and that absolutely deserves its own post soon.

    The first few days were full on. Day one was the shakedown dive and night dive one. Day two was deep dives one and two. Day three was deep dives three and four, which completed Deep Diver. Day four was night dives two and three.

    After that I had a reset day, then moved into nine days of diving with Gemma and Elite. Looking back, those first four days felt like the training block of the trip before settling into the wider holiday diving.

    Calm leadership matters

    One thing I did appreciate was the instructor. He was calm, relaxed and good to be around.

    That mattered. When you are doing deeper training dives, watching gas, tracking depth, checking no-decompression limit and thinking about ascent discipline, the tone of the person leading the dive can spread through the whole group.

    If an instructor is rushed, tense or casual in the wrong way, that can make the whole dive feel messy. In this case, his calmness helped me stay calm as well.

    The dives felt managed rather than pressured, and that gave me more mental space to focus on what I was supposed to be learning.

    Safety culture matters too

    I do need to separate the instructor from the wider centre culture, because those are not always the same thing.

    The instructor I trained with was really good. But over those four days I heard comments from a couple of Divemasters that sounded, to me, like new divers or people doing try dives were being encouraged to be less than accurate on medical forms.

    I raised what I had heard with the centre when I had the opportunity. I cannot know what, if anything, was done with that concern afterwards.

    But it mattered to me because dive medicals are not paperwork theatre. They are part of the safety system. New divers, nervous divers and try-dive participants should be made to feel that honesty is the safe and correct route, not an inconvenience.

    I had originally booked there because I thought Wessam was still with them. Once I realised he was elsewhere, I moved over to Elite Divers to follow him for the rest of the trip’s diving.

    That experience made me think differently about choosing a dive centre. Before this, I probably thought instructor first. A good instructor still matters massively, but the wider system around them matters too.

    A good instructor can shape a dive. A good safety culture shapes everything around it.

    Narcosis: no obvious effect, but no complacency

    Personally, I did not feel any obvious narcosis at 40 metres.

    I was able to carry out the example tasks at the same rate as I had at the surface, and the instructor confirmed that he could not see any difference in how I was performing.

    But that does not mean I think I am immune to narcosis. That would be a dangerous lesson to take from it.

    At most, it means that on that dive, in those conditions, I seemed to tolerate it well. Maybe I have a greater resistance, maybe I was lucky, maybe the situation simply did not expose it. Either way, narcosis is not something I want to treat casually.

    If something can affect your judgement while also affecting your ability to judge your own judgement, then the answer is not ego. The answer is planning, limits, buddy awareness and honesty.

    Gas became very real

    What I did notice very clearly was gas.

    I am a greedy breather, and at 40 metres I could see the needle moving. That made the planning feel very real.

    It made me focus on not wasting movement, checking which gas I was breathing at what depth, and tracking my no-decompression limit as it moved surprisingly fast, especially when doing multiple deep dives around 40 metres.

    Everything had a cost. Gas had a cost. Time had a cost. Movement had a cost. Attention had a cost.

    I was glad to know I had taken an additional side-slung pony, and that we also had a 38% mix available at 5 metres for the safety stop.

    That did not make the dive casual. It made it feel planned.

    The cold surprised me

    The other thing that surprised me was the temperature.

    I was comfortable in my 3 mm shortie in the Red Sea, but once we got down through the 20–30 metre range, and especially around 40 metres, there was definitely a chill.

    That was a useful reminder that even warm-water diving changes with depth.

    It is easy to think of the Red Sea as warm, bright and comfortable — and much of it is — but depth still changes the feel of the dive. It changes light, temperature, gas use, time and how deliberate you need to be.

    Forty metres is not automatically interesting

    One thing I did not expect to come away with was the feeling that 40 metres can actually be quite boring if there is no real reason to be there.

    At depth I felt relaxed. I could hover, look up and see the fish above me, look out into the deep blue, and look down into the nothing as the wall fell far below.

    It was calm and beautiful in its own way.

    But it also made something very clear: depth by itself is not the point.

    Leaving a Deep Diver course thinking, “Yeah, I do not need to go deep unless there is actually a reason,” was not what I expected. But it was probably one of the most useful lessons from the course.

    Depth needs a reason

    I would happily go deep again if there was a genuine reason to be there.

    A wreck feature, a swim-through, a wall, marine life, a training objective, or something at depth that actually adds to the dive — those all make sense to me.

    If there was a swim-through at 38 metres that allowed me to see something special, that would feel like a reason. If the only point of the dive was to touch 40 metres and come back up, I am not sure that interests me much.

    Depth is not the reward by itself. Depth is just where something might be.

    The side-slung pony changed my thinking

    Using the side-slung pony was one of the biggest practical takeaways from the course.

    It gave me a small taste of what carrying gas beside me could feel like, and it helped push me toward sidemount rather than twinset as the route I am more interested in.

    I enjoyed the gas planning more than I expected. That was probably the point where I started properly looking into decompression diving.

    Not just because of depth, but because of what planning can give you: longer dives, wreck-penetration options, more redundancy, more “what if” thinking and more structured problem-solving.

    It sounds backwards to some people, but technical diving can become safer in certain ways because you stop pretending the simple plan is enough. You plan for failures. You plan gas. You plan exits. You plan reserves. You plan what you will do if something changes.

    That appeals to my brain a lot.

    Deep does not mean better

    Deep Diver showed me that depth is just a number.

    It does not automatically make you a better diver, and it does not make you a worse one either.

    Going deeper is not the achievement by itself. What matters is staying within your limits, understanding what changes at depth, and being honest about whether the dive actually has a reason.

    For me, the course did not make me want to chase depth. It made me think more seriously about how sidemount and technical training might allow me to extend my limits safely, with better planning, more redundancy, clearer gas choices and more structured answers to the “what ifs.”

    The start of a technical-thinking path

    I think this course was one of the points where I started looking more seriously at the technical side of diving.

    Not because I suddenly wanted to go as deep as possible, but because I liked the thinking. I liked the planning. I liked the structure. I liked the idea of having proper answers to problems before they happen.

    Deco diving, sidemount and technical training appeal to me because they are not just about extending depth. They can also be about extending options, extending time, improving redundancy, and making the “what if” part of the plan instead of pretending it does not exist.

    That is the bit I enjoy: the preparation, the logic, the problem-solving, and the feeling that the dive has been thought through properly.

    Final thought

    Deep Diver did not teach me to chase depth.

    It taught me to respect what depth changes.

    It changes gas use. It changes temperature. It changes time. It changes no-decompression limit. It changes how much space you have for casual thinking. It also changes how much the culture around the dive matters.

    The safety concerns I had during that training block made me look harder at what is important. A good instructor matters, but the centre culture matters too. If an instructor holds themselves to a high standard, but works somewhere that does not seem to hold the same standards around safety, medical honesty or reporting concerns, that raises difficult questions.

    That is not about blame. It is about standards.

    I left Deep Diver with more respect for gas planning, more interest in sidemount and technical diving, and less interest in depth for its own sake.

    That feels like a useful result.

    Depth is only a number. Standards are what keep that number safe.